New

AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 10/1 TC 95 - mm. 950 - As per E.C. rules

SKU: LIBRA 10/1 TC 95
Sign up for price alert

Follow us ...



Makk.it - Vertical Panel SawsVertical Panel Saws
Cuts + V-Grooving


EcoMakk.it - Compactors and Grinders for Waste Polystyrene EpsCompactors and Grinders for Waste Polystyrene Eps


Plexiglass.biz - Machinery Work Plexiglas, Methacrylate, PmmaMachinery Work Plexiglas, Pmma, etc...


AlluMak.com - Machinery Aluminium Profiles and Alucobond PanelsMachinery Aluminium Profiles and Alucobond Panels


Riciclare.biz - Recycling MachineryRecycling Machinery


Shipping . . .
Do you want to know the cost of shipping of this product? Write to Us . . . [email protected]

Call us for More Information on this Product . . . 
Tel. +39.329.2736832
(Mr. Mauro Campi)

Call us on Skype . . . (michele.mak)
WhatsApp: +39.393.5129610

Our Team . . .
. . . Click Here


Details
Details

AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 10/1 TC 95 - mm. 950 - As per E.C. rules
Calibrating-sanding machine with:
Combined individual group 
including:
Fluted steel roll ø 120 mm, with pressure multiplier on belt tensioning and decimal adjustment of working height.
Full rigid pad (density 0,68), with glued graphite canvas, on extractable bar with decimal adjustment of working height.

STANDARD EQUIPMENT

Base and controls
• Control board on the front of the machine 
• Tubular steel base with monolithic structure and locking of operating groups in high position 

Table
• Motorized lifting of the worktable with digital indicatore digital of working height
• Natural rubber conveyor belt 
• 2-speed carpet feeding 

Operating groups
• Tilting belt-tightening rolls - fulcrum in the center - to absorbe possible taper of the sanding belt
• Oscillation of sanding belts through electronic system
• Introduction of sanding belts from the left side  
• Grooved rubber-coated presser roll in the 1st position with piece Rullo pressore gommato scanalato in 1° posizione con piece anti-return system
• 40-Sh rubber-coated floating presser rolls with differentiated compression  
• Inlet flexible steel foil presser at the 1st operating group  
• Automatic brake for a quick stop of operating groups 

Safety
• Direct starting of the main motor 
• Inlet handrail berrier with emergency 
• Emergencies on the machine access doors 
• Side belt-guards and on tightening
• Front and back mushroom emergency pushbutton 
• Padlockable main switch 
• Overload protection on the main motor 

TECHNICAL DATA
- Working width mm. 950
- Working height mm. 4 ÷ 170
- Sanding belt width mm. 970
- Sanding belt development mm. 1525
- Main motor power kW (HP) 7,5 (10)
- 2 feeding speeds of carpet m/min 4,5 / 9
- Feeding unit motor power kW (HP) 0,3/0,55 (0,4/0,7)

Motor power in S1.

N.W. The machine is produced without extra cost with any voltage except for 220 or 230 Volts or lower voltages

Combined individual group including:
Grooved stgeel roll ø 120 mm with pressure multiplier on belt tensioning and decimal adjustment of the working height.
Full rigid pad (density 0,68), with glued graphite cloth, on extractable bar with decimal adjustment of the working height.

VARIATIONS FOR RULES:

CA7264 Rules of European safety (E.C. brand)

CA6290 U.S.A. version

CA6291 CANADA Version

VARIATIONS ON REQUEST:

CA5210 Version at 220 (230) Volts
N.W.
In case of selection of the main motor 11 kW (15HP) (13 kW 18HP a 60hz) it's required to add the automatic star/delta starting.

CA5291 Electronic visualizer for working height in inches 

VARIATIONS FOR CALIBRATING/SANDING ROLLS:

CA7265 Rubber-coated roll ø 120 mm 85 Sh
CA4225 Selector for roll positioning from the control board equipped with:
• Pneumatic cylinder for activation 
• Decimal adjustment of roll position according to the thickness of abrasive roll 

VARIATIONS FOR FULL PADS: (IN ADDITION TO THE STANDARD PAD)
CA4226 Selector for roll positioning from the control board equipped with: 
• Pneumatic cylinder for activation 
• Decimal adjustment of pad position
CA5289 Half-rigid full pad - Equipped with extractable bar equipped with rubber + felt (density D=0,68)
N.W. To be combined with an electronic programmer of the FOX series (recommended for sanding veneered panels)

MACHINE CONTROLS:
CA5558 Electronic control "FOX 500 KTR" - It operates the automatic intervention of pad and/or of a piece inlet/outlet sanding roll.
The automatic intervention is synchronized either with the 1st or the 2nd feeding speed (standard 2-speed geared motor) either with any speed set up through motovariator or inverter.
It operates the timing of max 2 roll groups or 1 roll and 1 pad 
N.W Obligatory to select an “X” version for the timed control of the roll group and of the pad.
For the Libra 10 it's obligatory to select the selectors for pad and roll positioning from the control board
Timing is only available on sanding rolls 45, 30 or 20 Sh
Not available with Eco System Package
Available for “X” version

VARIATIONS FOR MOTORIZATIONS OF OPERATING GROUPS:
CA7206 Table automatic positioning through micro
CA4272 Table electronic positioning with pre-set decimal adjustment
 of removal
CA6233 Automatic centering of conveyor belt
CA5255 Table with 2 inlet rolls and 2 outlet ones

VARIATIONS FOR CLEANING SYSTEMS:
CA5208 Oscillating blower on the group
equipped with timer for compressed air saving 

PACKINGS: N.W. For loading in container it's obligatory to select a packing 

CA9221 Pallet + nylon
CA9216 Wooden case

Additional Info
Additional Info
ManufacturerCasadei Busellato
Reviews
Write Your Own Review
You're reviewing: AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 10/1 TC 95 - mm. 950 - As per E.C. rules


ALSO WE RECOMMEND THESE PRODUCTS ...