New

AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 35/1 TC 110 - As per E.C. rules

SKU: LIBRA 35/1 TC 110
Sign up for price alert

Follow us ...



Makk.it - Vertical Panel SawsVertical Panel Saws
Cuts + V-Grooving


EcoMakk.it - Compactors and Grinders for Waste Polystyrene EpsCompactors and Grinders for Waste Polystyrene Eps


Plexiglass.biz - Machinery Work Plexiglas, Methacrylate, PmmaMachinery Work Plexiglas, Pmma, etc...


AlluMak.com - Machinery Aluminium Profiles and Alucobond PanelsMachinery Aluminium Profiles and Alucobond Panels


Riciclare.biz - Recycling MachineryRecycling Machinery


Shipping . . .
Do you want to know the cost of shipping of this product? Write to Us . . . [email protected]

Call us for More Information on this Product . . . 
Tel. +39.329.2736832
(Mr. Mauro Campi)

Call us on Skype . . . (michele.mak)
WhatsApp: +39.393.5129610

Our Team . . .
. . . Click Here


Details
Details

AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 35/1 TC 110 - As per E.C. rules
Calibrating-sanding machine with:
Combined individual group 
including: 
Fluted steel roll ø 120 mm, with pressure multiplier on belt tensioning and decimal adjustment of working height.
Full rigid pad (density 0,68), with glued graphite canvas, on extractable bar with decimal adjustment of working height.
Selector for pad positioning from the control board equipped with:
• Pneumatic cylinder for activation 
• Decimal adjustment of roll position according to the thickness of abrasive roll 

STANDARD EQUIPMENT

Base and controls
• Control board on the front of the machine 
• Tubular steel base with monolithic structure and locking of operating groups in high position 

Table
• Motorized lifting of the worktable with digital electronic indicator of working height 
• 60 Sh Natural rubber conveyor belt
• Inlet and outlet double roll at conveyor belt 
• 2-speed carpet feeding

Operating groups
• Tilting belt-tightening rolls - fulcrum in the center - to absorbe possible taper of the sanding belt
• Oscillation of sanding belts through electronic system
• Introduction of sanding belts from the left side  
• Grooved rubber-coated presser roll in the 1st position with piece anti-return system
• 40-Sh rubber-coated floating presser rolls with differentiated compression  
• Inlet flexible steel foil presser at the 1st operating group  
• Automatic brake for a quick stop of operating groups 

Safety
• Automatic star/delta system of the main motor
• Over-thickness safety micro 
• Inlet handrail barrier with emergency 
• Emergencies on the machine access doors 
• Side belt-guards and on tightening
• Front and back mushroom emergency pushbutton 
• Padlockable main switch 
• Overload protection on the main motor
• Automatic stop of the machine in case of emergency for overloading of the main motor, lack of compressed air, lack of sanding belt tensioning, side exit of the sanding belt, failure of the sanding belt 

TECHNICAL DATA
- Working width mm. 950
- Working height mm. 4 ÷ 170
- Sanding belt width mm. 970
- Sanding belt development mm. 1900
- Main motor power kW (HP) 11 (15)
- 2 feeding speeds of carpet m/min 4,5 / 9
- Feeding unit motor power kW (HP) 0,3/0,55 (0,4/0,7)

Motor power in S1.

N.W. The machine is produced in standard configuration Volt 400/ Hz 50 and must be fed by 3-phase + neutral + earth.
For feeding net at 400 Volt without neutral and voltages more than 400 Volt (even with neutral) it's required the single-phase tranformer in the optional items of the price list.
For voltages 220/230 Volt (50/60 Hz) an additional cost is foreseen.

Machines can be equipped with sectionized pads in the X and Y versions:

Sectionized elastic pad (pitch 56) Available for 950 and 1100 versions. Equipped with 17 sectors (version 950) and 20 sectors (version 1100) with adjustable single pressure, equipped with N° 2 contact inserts:
• half-rigid insert made by flexible steel+felt foil (density D=0,68) and graphite cloth (recommended for massive or veneered panels) 
• soft insert made by thin flexible steel + rubber and felt foil (density D=0,68) and graphite cloth (recommended for veneered or painted panels)

Electronic sectionized pad (pitch 56) - Available for 1100 version equipped with electronic programmer "FOX-500", reading bar with micro-switches
- Divided in 20 sectors. Sectors are operated through "FOX-500" that activates synchronization of intervention with feeding speed and the quantity of sectors according the geometrical shape of piece. It allows the selection of a greater or smaller number at left or at right or at both sides of the piece.
- The programmer also allows timing of 2 roll operating groups more provided of hardness 20, 30 or 45 Sh and equipped with selector for positioning from the control board  
- Adjustment of the working pressure 
- Equipped with N° 2 contact inserts:
• half-rigid insert made by flexible steel+felt foil (density D=0,68) and graphite cloth (recommended for massive or veneered panels) 
• soft insert made by thin flexible steel + rubber and felt foil (density D=0,68) and graphite cloth (recommended for veneered or painted panels)

VARIATIONS FOR RULES:

CA2526 Rules of European safety (E.C. brand)

CA2527 U.S.A. Version

CA2528 CANADA Versione

CA2531 Single-phase transformer 
N.W. Required for voltages more than 400 Volt
Required for voltage 400 Volt 50 Hz in case net lacks neutral phase 

VARIATIONS ON REQUEST:
CA2529
Version at 220 (230) Volt

PRECONFIGURATED VERSIONS 
N.W.
The optional items included in the preconfigurated versions are in addition to devices of basic machines 

CA2570 "X" Version for TC 110
- Pneumatic on / off of roll 
- Electronic positioning of the working thickness 

CA2571 "X" Version for RTC 95 - RTC 110
- Pneumatic on / off of roll on the 1st roll group “R”
- Pneumatic on / off of roll on the 2nd combined group "TC”
- Electronic positioning of the working thickness

CA2572 Versione "Y" per TC 110
- Pneumatic on / off of roll 
- Sectionized elastic pad (pitch 56)
- Electronic control FOX 500 KTR
- Electronic positioning of the working thickness

CA2573 Versione "Y" per RTC 95 - RTC 110
- Pneumatic on / off of roll sul primo gruppo “R”
- Pneumatic on / off of roll sul secondo gruppo “TC”
- Sectionized elastic pad (pitch 56) 
- Electronic control FOX 500 KTR
- Electronic positioning of the working thickness

CA2574 Versione "Z" per TC 110
- Pneumatic on / off of roll 
- Sectionized elastic pad (pitch 56) 
- Electronic positioning of the working thickness 
- Electronic control FOX 500

CA2579 Versione "Z" per RTC 110
- Pneumatic on / off of roll sul primo gruppo “R”
- Pneumatic on / off of roll sul secondo gruppo “TC”
- Sectionized elastic pad (pitch 56)  
- Electronic positioning of the working thickness 
- Electronic control  FOX 500

VARIATIONS FOR CALIBRATING/SANDING ROLLS:

CA2532 Rubber-coated roll 1° group ø 120 mm, 85 Sh (TC - RTC)

CA2533 Rubber-coated roll 1° group ø 120 mm, 65 Sh (TC - RTC)

CA2534 Rubber-coated roll 1° group ø 120 mm, 45 Sh (TC - RTC)

CA2535 Grooved steel roll 2° group ø 120 mm, (RTC)

CA2536 Rubber-coated roll 2° group ø 120 mm, 85 Sh (RTC)

CA2537 Rubber-coated roll 2° group ø 120 mm, 65 Sh (RTC)

VARIATIONS FOR FULL PADS: (IN ADDITION TO THE STANDARD PAD)

CA2540 Half-rigid full pad - Equipped with extractable bar equipped with rubber + felt (density D=0,68) 
N.W. 
To be combined with an electronic programmer of the FOX series (recommended for sanding veneered panels)

MACHINE CONTROLS:

CA2530 Electronic visualizer for working height in inches 

CA5558 Electronic control "FOX 500 KTR" - It operates the automatic intervention of pad and/or of a piece inlet/outlet sanding roll.
The automatic intervention is synchronized either with the 1st or the 2nd feeding speed (standard 2-speed geared motor) either with any speed set up through motovariator or inverter. 
It operates the timing of max 2 roll groups or 1 roll and 1 pad 
N.W Obligatory to select an “X” version for the timed control of the roll group and of the pad. 
For the Libra 10 it's obligatory to select the selectors for pad and roll positioning from the control board
Timing is only available on sanding rolls 45, 30 or 20 Sh 
Not available with Eco System Package 
Available for “X” version

CA5559 Electronic control "FOX 500 ST"
For machines without elastic or electronic sectionized pad
With 2-line LCD display and dustproof membrane keyboard and with integrated signaling LED. The control allows the operation of:
• Automatic sequential ignition of main motors 
• 3 operating groups
• Working thickness 
• On/off and timed interventions of full pad and sanding rolls 
• 2 inverters (feeding and/or operating groups)
• Speed of sanding belts 
• Ignition of a brush cleaning group and an outlet blower group 
• Ignition of the vacuum table
• Reversal of rotation of n° 1 sanding belt 
• Activation and control of timing of blowers for cleaning of belts and blowers for outlet piece cleaning 
• Operation of the machine in manual, half-automatic or automatic mode with 4 working programs that can be configurated and selected quickly through 4 function keys 
• Graphical visualization of the machine configuration on the frontal panel
• Report machine operation (working hours/ignition hours)
• Management of machine alarms 
• Available languages: I, GB, E, D, FR
N.W. For the timed control of the roll group and of the pad it's obligatory to select a preconfigurated version with on/off selectors of roll and pad
Timing is only available on sanding rolls 45, 30 or 20 Sh. The FOX-500 ST can manage 2 inverters at the most (as you like on 2 operating groups or 1 inverter on the operating group and 1 inverter on the feeding unit)
Only available for “X” version 
Not available with the option "Eco System Package"

CA5560 Electronic control "FOX 500 ST" (pad)
In place of FOX 500 for machines equipped with elastic or electronic sectionized pad 
With 2-line LCD display and dustproof membrane keyboard and with integrated signaling LED.
The control allows the operation of
• Total operation of an electronic sectionized pad, with 3 operating ways:
  - Pad excluded 
  - Full pad activated with all working sectors 
  - Sectionized pad, activated only with the sectors interested in the geometrical shape of the working piece
Preselection and activation of + o - sectors at right or at left of panel
• Automatic sequential ignition of main motors 
• Management of 3 operating groups
• Working thickness 
• On/off and timed interventions of full pad and sanding rolls 
• 2 inverters (feeding and/or operating groups) 
• Speed of sanding belts 
• Ignition of a brush cleaning group and an outlet blower group 
• Ignition of the vacuum table
• Reversal of rotation of n° 1 sanding belt 
• Activation and control of timing of blowers for cleaning of belts and blowers for outlet piece cleaning 
• Operation of the machine in manual, half-automatic or automatic mode with 4 working programs that can be configurated and selected quickly through 4 function keys 
• Graphical visualization of the machine configuration on the frontal panel
• Report machine operation (working hours/ignition hours) 
• Management of machine alarms 
• Available languages: I, F, GB, D, E
N.W. For the timed control of the roll group and of the pad it's obligatory to select a preconfigurated version with on/off selectors of roll and pad
Timing is only available on sanding rolls 45, 30 or 20 Sh. The FOX-500 ST can manage 2 inverters at the most (as you like on 2 operating groups or 1 inverter on the operating group and 1 inverter on the feeding unit) 
Only available for “Y”, “Z” and “Z Super” version  
Not available with the option "Eco System Package"

VARIATIONS FOR MOTORIZATIONS OF OPERATING GROUPS:

CA2546 Main motor power 15 kW (20 HP)

CA2547 Main motor power 18,5 kW (25 HP)

CA2548 Main 2-speed motor power 11 kW (15 HP)

CA2549 Main 2-speed motor power 15 kW (20 HP)

VARIATIONS FOR WORKTABLE:

CA2576 Electronic table positioning with decimal pre-set removal adjustment 
N.W.
Already included in “X”, “Y”, “Z” versions.

CA2569 Automatic centering of the conveyor belt 
N.W.
Recommended optional item

VARIATIONS FOR CLEANING SYSTEMS:

CA2566 Oscillating timed blower 1° group for compressed air saving

CA2567 Oscillating timed blower 2° group for compressed air saving

VARIATIONS FOR MOTORIZATIONS OF CARPET FEEDING:

CA2568 Electronic variator (inverter) 0,75 kW (1HP) for carpet feeding with speed from 3,5 to 18 m/min.
Speed adjustment from frontal control board.

PACKINGS: N.W. For loading in container it's obligatory to select a packing 

CA9261 Pallet + nylon "95 version"

CA9262 Wooden case "95 version"

CA9263 Pallet + nylon "110 version"

CA9264 Wooden case "110 versione"

MORE AVAILABLE MODELS:

LIBRA 35/2 RTC 95
1° group: Grooved steel roll ø 120 mm, with decimal adjustment of the working height 
2° combined group including:
Rubber-coated roll ø 120 mm hardness 45 Sh with decimal adjustment of the working height  
Full rigid pad (density 0,68), with graphite cloth on extractable bar with decimal adjustment of the working height  
Selecor for pad positioning from the control board equipped with:
Pneumatic cylinder for the activation
Decimal adjustment of pad position

LIBRA 35/2 RTC 110
1° group: Grooved steel roll ø 120 mm, with decimal adjustment of the working height 
2° combined group including: 
Rubber-coated roll ø 120 mm hardness 45 Sh with decimal adjustment of the working height  
Full rigid pad (density 0,68), with graphite cloth on extractable bar with decimal adjustment of the working height  
Selecor for pad positioning from the control board equipped with: 
Pneumatic cylinder for the activation
Decimal adjustment of pad position

 

 

Additional Info
Additional Info
ManufacturerCasadei Busellato
Reviews
Write Your Own Review
You're reviewing: AUTOMATIC CALIBRATING-SANDING MACHINE WITH 1 OPERATING GROUP CASADEI BUSELLATO mod. LIBRA 35/1 TC 110 - As per E.C. rules


ALSO WE RECOMMEND THESE PRODUCTS ...