NewSale

INDUSTRIAL BAND RESAW FLEXIFEEDER Mod.R800 with FEEDER Mod.RTF200 - CE

SKU: R800+RTF200
Sign up for price alert

Follow us ...



Makk.it - Vertical Panel SawsVertical Panel Saws
Cuts + V-Grooving


EcoMakk.it - Compactors and Grinders for Waste Polystyrene EpsCompactors and Grinders for Waste Polystyrene Eps


Plexiglass.biz - Machinery Work Plexiglas, Methacrylate, PmmaMachinery Work Plexiglas, Pmma, etc...


AlluMak.com - Machinery Aluminium Profiles and Alucobond PanelsMachinery Aluminium Profiles and Alucobond Panels


Riciclare.biz - Recycling MachineryRecycling Machinery


Shipping . . .
Do you want to know the cost of shipping of this product? Write to Us . . . [email protected]

Call us for More Information on this Product . . . 
Tel. +39.329.2736832
(Mr. Mauro Campi)

Call us on Skype . . . (michele.mak)
WhatsApp: +39.393.5129610

Our Team . . .
. . . Click Here


Details
Details

INDUSTRIAL BAND RESAW FLEXIFEEDER Mod.R800 with FEEDER Mod.RTF200 - CE
The FLEXIFEEDER line is composed of two heavy duty bandsaw models R800 and R1000 with a wide saw blade that has been expressly disegned, structured and sized to use a mechanical workpiece feeding and with stand the high power of machine motor and high speeds of feeding device (upto 30 mt/min).
The R800 can accept max 80 mm saw blade width, the R1000 max 100 mm.
The machine frame is made of electric welded sheet steel.
The cast iron disco wheels are very thick in order to ensure the maximum efficiency and run on dustproof ballbearings.
Pneumatic pad brake fitted on R800.
Pneumatic disc brake fitted on R1000.
The RTF200 feeder (exclusively combined to R800) and RTF400 feeder (exclusively combined to R1000) are equipped with two feeding rollers (whose position can be higher or lower depending from the workpiece height) and an idle rollers fence tilting upto 45°.
Two potentiometers fitted on control panel adjust the infeed speed and the cutting speed (upto 30 mt/min) by brushless motor.
When fence is tilted it's possible to cut, using special rollers (options), rectangular and square workpiece on the diagonal.
The optical sensor allows the opening of the feeding rollers for the workpiece introduction and the change of the speeds.

Features
- The bandsaw frame is of welded steel.
- Disc type wheels in cast-iron.
- Steel table, tilting up to 15°.
- Fully guarded sawblade.
- Pneumatic braking of wheels.
- Automatic star-delta starter.
- Motor protection switch with release coil.
- Digital amperometer.
- Safety micro-switch to doors.
- Emergency stop.
- Hydraulic sawblade tensioning system.
- Rackwork for raising and lowering the top guide.
- Top and bottom guide with antifriction blocks.
- Sawblade cleaning felt with diesel-oil tank.
- Cleaning scrapers on wheels.

Technical Data ...

INDUSTRIAL BAND RESAW Mod.800:
Diameter of saw wheels mm. 800
Max. cutting height mm. 400
Max. cutting width mm. 770
Table height from floor mm. 960
Table size mm. 1060x800
Max./min. lenght of blades mm. 5530 / 5380
Max./min.width of blades mm. 80x0,8
Motor power HP 15 (kW 11)
Wheel speed  680 r.p.m.
Sawblade speed 28,5 mt/sec.
Dust suction outlet: nr. 3 x diam. mm. 120/100
Compressed air consumption  60 lt/min. (6/8 bar)
Net weight Kg. 880
Required capacity for extraction system m³/h 3840

PNEUMETIC/HYDROSTATIC FEEDER Mod.RTF200:
Max./min. height of feeding rollers mm. 50
Feeding rollers diameter mm. 200
Standard feedings rollers: nr. 2
Height of standard rollers fence mm. 300
Length of rollers fence mm. 600
Rollers fence tilt mm. 0-45°
Max. rollers-blade clearance mm. 200
Max. fence-blade clearance mm. 420
Motor power kW 0,37
Variable feed speed rate mt/min. 0 ÷ 30
Operating pressure bar 3 ÷ 6 (Lt./min. 30)
Net weight Kg. 180

Additional Info
Additional Info
ManufacturerCentauro
Reviews
Write Your Own Review
You're reviewing: INDUSTRIAL BAND RESAW FLEXIFEEDER Mod.R800 with FEEDER Mod.RTF200 - CE


ALSO WE RECOMMEND THESE PRODUCTS ...