PNEUMATIC JOINING MACHINE FOR FRAME ASSEMBLING mod. JOINT-5x5-A - E.C.
Regular Price: €1,240.00
Special Price €992.00
This is a bench-model with pneumatic operation, of easy construction and easy to be used.
The control is given by the double-stroke pedal: by the 1st part it clamps the frame, by the 2nd one it inserts the clip.
The JOINT-5x5-A is complete with the upper frame clamping, only.
It uses clips mm. 7-10-15 mm. high, mm. 4 and 12 on request.
It can join either frames with 90-degree angles or 120-degree ones (hexagon) and 135 degrees (octagone) with the min. section mm. 5x5 and the max. mm. 100x70.
The machine is supplied equipped with interchangeable pressers, governor and manometer for the control of the working pressure, compensator thicknesses for clips mm. 7-10-15 high.
Furthermore, it's equipped with safety guard with machine stop device.
Min. profile dimensions mm. 5x5
Max. profile dimensions mm. 100x70
Clips height mm. 7-10-15 (mm. 4-12 on request)
Store capacity: nr. 250 clips
Pneumatic feed 8 bar
Air consumption (per working cycle) 1,40 Nl at 7 bar
Number of cycles (at the maximum speed): 40 per minute
Height of the working table mm. 950 from the ground
Overall dimensions mm. 350x450x320
Weight kg. 27
Optional accessories on request
* Glue dispenser - pneumatic device that prepares the operator the glue ("Vynavil" type cold glue) to be spread on the surface to be joined. Useful for frames of great sections and soft wood. Complete with connections.
* Compensator thickness for clips mm. 4
* Compensator thickness for clips mm. 12
* Air lubrication filter, it filters impurities and moisture of the compressed air and keeps optimal the lubrication of the pneumatic components for a long life of the same. It's required if the machine is far more than 5 mts. from the compressor.
* Flexible halogen lamp, appliable to all joining machines. Ideal to light the working area. Its flexibility allows to adjust positioning making visible the less accessible points, too.
* Square for hexagon (120 degrees) to join hexagonal frames. It's applied to the square at 90 degrees.
* Square for octagon (1350 degrees) to join octagonal frames. It's applied to the square at 90 degrees.
* Pneumatic clip-pushing device
* Couple of working table extensions, they are applied to the container of machines and allow to increase the work of the machine themselves.
* Variable tilting bench (the bench, only), support bench for the mod. JUMBO that allows to tilt the machine from horizontal to almost vertical (87 degrees) to join great frames. It has a handy drawer.
* Enlargement table (to be fixed to extensions), it's applied to extensions in order to enlarge the working table when the tilting bench is used.
* Couple of square rises, they are applied to the square in order to rise the support walls of the frame mm. 7 per mm. 7.
ACCESSORI Clicca Qui Sotto:
ALSO WE RECOMMEND THESE PRODUCTS ...
Regular Price: €4,036.50
Special Price €3,148.47
Regular Price: €2,803.40
Special Price €2,186.65
Regular Price: €5,454.00
Special Price €4,254.12
Regular Price: €11,240.00
Special Price €9,132.50
Regular Price: €10,190.00
Special Price €8,279.38