AUTOMATIC VERTICAL PANEL SAW MAKK Mod. DPM-AV – E.C.
For Cutting Panels mm. 5100×2100 (3700×2100 with optimizer, 4200×2100 optional).
Control Panel with PC with Optimizing Software of Panel Cuts.
Automatic cutting program. Panel lifting system.
Automatic positioning system. System with Scoring Blade.
Machine for cutting panels either in vertical or in horizontal, for all cutting needs, with the best quality/price ratio on the market.
For Automatic Cut, either in Vertical or in Horizontal, of Panels made of:
– Ennobled chipboard
– Massive wood
– Plastic materials
Control Panel with PC with Optimizing Software of Panel Cuts (3700×2100 standard, 4200×2100 optional). Automatic Positioning System.
The machine automatically switches to the vertical and horizontal position by automatic positions system.
Operators make non intervention during the sizing process with DPM-AV that is developed model.
Whereby the panel lifting system is on the DPM-AV model, the sizing process is completed while panel staying on the machine.
Automatic Cutting Program.
Where there is the automatic cutting program which coming with the brand new DPM-AV, operators enter the value to information display and sizing process will be completed automatically.
Automatic Lifting System.
The automatic lifting system supplied with the DPM-AV model exhibits the difference of vertical panel saw machine once more.
Thanks to the system, even a single person can handle and cut into desired size the largest panels without using any power.
Sizing with a high precision can be obtained with PC controlled accurate stop system.
The pneumatic lifting system available with pneumatic pliers, facilitates the work of users considerably by trimming bottom of a panel and allowing subsequent horizontal and vertical cutting operations, without any difficulties.
Panel Load System.
Worked with precision, it uses high-quality bearing rollers with double bearings that help the operator a lot by allowing the panel to move easily on the machine.
Panel Cutting System.
Once the measurements and quantities have been included in the software, you can obtain panels with very precise cuts. The process is then completed with the fully automatic panel cutting system.
Panel Lifting System by Pliers.
The system of clamping pliers of panels used for the mod.DPM-AV, highlights once again its peculiarity in the vertical cut.
Thanks to this system, even one operator can cut in the desired dimensions great panels, too, without the least effort.
By the PC control system you can make cuts.
Through the pneumatic clamping system of the mod.DPM-AV, panels can be trimmed in the lower part.
Therefore, operator’s work is extremely facilitated allowing to make a cutting operation without effort and with the maximum precision.
System with Scoring Blade.
The scoring blade system available with the machine prevents chipping that could occur during the cutting process.
Movable Panel System.
Panel is protected from damages during horizontal ripping operations due to automatically traveling panel system.
– Completely welded frame, with panel support table with PVC-profiled listels, that can be moved automatically in order to avoid the contact with the circular blade in horizontal cuts.
– Automatic Positioning System.
– Automatic Cutting Program.
– PC Control Panel with Optimizing Software of Panel Cuts.
– Scoring group with circular conical blade, with belt transmission.
– Automatic movable table, with pneumatic operation.
– Panel Lifting System by Pliers.
– Automatic Panel Lifting System.
– Tilting device for support of small pieces to be cut.
– Inverter for adjustment of the rotation speed (500/4500 r.p.m.).
– Electrical predisposition for simultaneous ON/OFF with suction group.
– Mechanical positioners for horizontal cuts.
– Panel lower double clamp for vertical cuts.
– THK upper and lower ball recirculation guides, for greater precision on machining, longer life and reliability in sliding.
– Nr. 2 wings for vertical cuts.
– Barcode Label Printer .
– Lower panel supports with metal wheels.
– Safety devices.
– Instruction manual and service keys.
– HM Circular blade.
– HM Circular blade of the scoring group.
– Motor power: 4 HP – 3 kW
– Volt 380-400/50 Hz, triphase
– Rotation speed of the circular blade: 500/4500 r.p.m.
– Rotation speed of the blade of scoring group: 7800 r.p.m.
– Max weight of the panel for lifting by pliers Kg. 250
– Min panel height with lifting by pliers mm. 200
– Cutting height: 2100 mm
– Cutting length: 5100 mm (3700 with optimizer, 4200 optional)
– Max cutting thickness: 60 mm (45 mm with pliers)
– Circular blade: mm. 250x30x3,2 Z=80 HM Trapezoidal
– Scoring blade: mm. 125x20x3 Z=24 HM Conical
– Overall dimensions (L x H x W): 6000 mm x 2980 mm x 1150 mm
– Total weight: 1400 Kg.
Optional on Request:
There are no reviews yet.