Description

CIRCULAR SAW TILTING BLADE SQUARING MACHINE SCM GROUP mod.NOVA SI300-S – As per E.C. rules

TECHNICAL DATA
Max cutting height at 90° mm. 100 with blade 315
Max cutting height at 45° mm. 70 with blade 315
Blade inclination (grades) 45
Blade lifting and inclination: manual
Main blade rotation speed 4000 r.p.m.
Engraver blade rotation speed 8500 r.p.m.
Main blade motor power kW (HP) 50Hz 5 (7)
Engraver blade motor power [S1] kW (HP) 50Hz 0,9 (1,2)
Squaring capacity: with carriage 1600
Cutting width at the parallel guide mm. 1000
Suction mouth diam.:
– at the base mm 120
– at the hanging protection mm 80
– at the dividing knife mm 60

STANDARD EQUIPMENT
Warranty 10 years on the carriage sliding system 
Anodized aluminium extruded sliding carriage with sliding system on steel guides fastened by riveting system
Sliding carriage 1600 mm long
Lifting and inclination of the blade group through handwheels from the machine front and visualization of blade group inclination through mechanical indicator
Compact base and short carriage
Squaring frame for quick positioning of the guide in angular cuts
Nr. 2 reversible stops on the squaring guide 
Extensions at the outlet table
Manual parallel guide with readout of the position on metrical scale with sliding on steel bar diam. 40 mm and micrometric adjustment
57.01.25 Cutting width 1000 mm on parallel guide
Direct starting of the main motor by pushbuttons
Engraving group with independent motorization from the outside and blade quick re-positioning stops 
Emergency pushbutton on the front of the machine
Emergency pushbutton on the side of the parallel guide (E.C. version)
Magnetothermic protection
Protection at the blade assembled on the dividing knife (Versions with electric protections) with suction mouth diam. 60 mm
Automatic motor brake on the main blade (E.C. and USA/Canada versions)
Padlockable main switch
Transformer for auxiliary circuit 110 V

OPTIONAL

55.50.65 Version “CUT 140” – Blade max diam. 400 mm for cutting height 140 mm with blade at 90° equipped with:
                 – hang protection at blades
                 – motor power kW 7 HP 9,5 Hz 50
                 – rotation speed of the main blade 3500 r.p.m.

57.01.22 Guide for angled cuts on sliding carriage equipped with extendable stop for cutting sizes up to 1500 mm

57.01.23 Guide for angled cuts with compensation of the size as to the blade independently from the used angles, equipped with aluminium guide with stop

57.01.62 Guide for parallel cuts on sliding carriage, quick installation on the carriage, equipped with millimetric rule

57.01.57 Position electronic reader for parallel guide with manual deplacement and height visualization 
                 – Selector for high and low guide
                 – preset pushbuttons
                 – position readout on magnetic band
                 – possibility of absolute and incremental deplacements

57.02.61 Cutting width 1270 mm on parallel guide

57.01.26 Cutting width 1500 mm on parallel guide

57.01.28 Motor kW7 Hz50 (kW8 Hz60) kW7 HP 9,5 Hz50 (kW8 HP 11 Hz60)

57.01.07 Eccentric piece-tightening arm

57.01.24 Partially excludable Hanging blade protection, with built-in suction, mouth diam. 80 mm
                 N.W. Already foreseen for SI400 NOVA in E.C. and USA/Canada versions

08.06.42 Seaworthy packing