Description

CIRCULAR SAW TILTING BLADE SQUARING MACHINE SCM GROUP mod.NOVA SI40 – As per E.C. rules

TECHNICAL DATA
Max cutting height at 90° mm. 136 with blade 400
Max cutting height at 45° mm. 97 with blade 400
Blade inclination (grades) 45
Blade lifting and inclination: manual
Main blade rotation speed 4000 r.p.m.
Engraver blade rotation speed 9200 r.p.m.
Main blade motor power kW (HP) 50Hz 5 (6,6)
Engraver blade motor power [S1] kW (HP) 50Hz 0,55 (0,75)
Squaring capacity: with carriage 2600 mm 2600×3200 / with carriage 3200 mm 3200×3200
Cutting width at the parallel guide mm. 1270
Suction mouth diam.:
– at the base mm 120
– at the hanging protection mm 80
– at the dividing knife mm n.d.

STANDARD EQUIPMENT
Cast iron saw group, lifting through dovetail guides and tilting through high rigidity sliding side rests, equipped with engraver with independent motor with setup from outside the machine.
Anodized aluminium sliding carriage (dimensions 360 x 2600 mm) with sliding system on high precision hardfened steel guides, faatened through riveting system.
Squaring frame (dimensions 1200 x 650 mm) equipped with:
– telescopic guide with 2 reversible stops and inclined metrical rule favourable to the operator
– piece-fastening arm
– telescopic support extension
– idle roll to facilitate panel loading and unloading
Dedicated saw guide for the parallel cut equipped with:
– “high rigidity” cast iron support
– micrometric adjustment and eccentric locking
– rectified steel round section sliding bar diam. 45 mm
Visualization of the inclination of the blade group on the front of the machine

OPTIONAL

58.04.90 Version with max. squaring stroke 3200 mm

58.04.80 Pushbuttons for starting and stop of the blade and the engraving blade, integrated in the sliding carriage
Very useful to work great pieces that prevent an easy and safe access to the main control board of the machine
N.W. Only for “Versions with max. squaring stroke 2600 mm or 3200 mm”

58.01.99 Motorized lifting and inclination of the blade group

58.05.21 Motorized parallel guide with electronic programmer (1 axis) equipped with
– position readout through encoder
– movement through ball recirculation screw
– continuous adjustment by automatic pushbutton or positionings
– possibility of incremental deplacements
– amovible guide body
– cutting width 1270 mm
N.W. Not available with “motorized lifting and tilting of blade group”

58.05.22 Version “READY 3” (3 axis) – Motorized parallel guide with electronic programmer equipped with
– position readout through encoder
– movement through ball recirculation screw
– continuous adjustment by automatic pushbutton or positionings
– possibility of incremental deplacements
– amovible guide body
– cutting width 1270 mm
Programmed and motorized movement of lifting and tilting of blade group 
N.W. – available for CE and USA-Canada versions, only

58.05.65 Version “READY 3 UP” (3 axis) – Motorized parallel guide with electronic programmer equipped with
– position readout through encoder
– movement through ball recirculation screw
– continuous adjustment by automatic pushbutton or positionings
– possibility of incremental deplacements
– amovible guide body
– cutting width 1270 mm
Programmed and motorized movement of lifting and tilting of blade group
– Adjustable hanging control panel
N.W. – available for CE and USA-Canada versions, only
– Not available with single-phase motor

58.02.13 Device for angular cuts with reversible stops composed by:
– telescopic guide with 2 reversible stops
– rest with angle quick selection system

58.02.15 Device for preset angular cuts positioned directly on the squaring frame 

58.05.03 Squaring frame with Compex device for angled cuts with automatic compensation of stop position

58.05.04 Squaring guide with nr. 2 LCD visualizers for reading stop position 
Each stop with its micrometric adjustment is equipped with independent electronic digital reader with detection system on magnetic band and visualization on LCD display.
N.W. The minimum height to which it’s possible to position the stop – nearest to the blade – is 420 mm (450 mm for double tilting saw +/-46°). It’s possible to fill this limit buying 1 “3rd squaring stop with LCD visualizer for position readout”.

58.05.05 3rd squaring stop with LCD visualizer for position readout
With its micrometric adjustment and equipped with independent electronic digital reader with detection system on magnetic band and visualization on LCD display.
N.W. Only for “Squaring guide with nr. 2 LCD visualizers for reading stop position”.

53.03.40 Expandable engraving blade
Min. ÷max. thickness: 2,8 ÷ 3,6 mm
Blade diam.: 120 mm
Hole diam.: 20 mm
Number of teeth: Z 24

58.05.01 Preparation for “DADO SET” – CE
Mechanical preparation in order to use a tool (not included) instead of the main blade.
– max diam. 200 mm/ 8”
– max thickness 19 mm/ 3/4”
Equipped with extension at the suspended protection of the blades.
N.W. Not available for machine in NO-CE and USA-Canada configuration

58.03.45 Additional table on the sliding carriage for support of great panels 

58.04.94 Hanging protection at the blade (cutting width 1270 mm) equipped with suction hose diam. 80 mm
N.W. For the SI 40 Nova: already foreseen in the standard configuration for E.C. and USA/Canada versions

53.03.16 Blade micro-lubrication device for working plastic materials and light aluminium and brass alloys
With adjustment system of the quantity of sprayed lubrication liquid
N.W.: – The device is obligatory for working light metals, very useful with special plastic materials
– It’s obligatory to select the optional item “Machine configuration for working extra-wood materials for the models that foresee it

58.02.05 Digital visualizer for readout of the height on the parallel guide equipped with: digital device composed by display and magnetic band

58.03.47 2 speedsmat the saw (3500/5000 r.p.m.)

58.03.35 3-phase motor 7kW (9,5HP) 50Hz – 8kW (10HP) 60Hz with automatic star/delta starting

08.69.09 Triple wall packing for base version (carriage 2600 mm)

08.69.11 Triple wall packing for version with carrige 3200 mm

08.69.16 Triple wall packing for version with carriage 2600 mm with motorized parallel guide or “READY 3”

08.69.40 Triple wall packing for version with carriage 3200 mm with motorized parallel guide or “READY 3”

08.69.79 Triple wall packing for version with carriage 2600 mm with “READY 3 UP”

08.69.80 Triple wall packing for version with carriage 3200 mm with “READY 3 UP”