Description

CIRCULAR SAW TILTING BLADE SQUARING MACHINE SCM GROUP mod.NOVA SI400-EP – As per E.C. rules

TECHNICAL DATA
Max cutting height at 90° mm. 140 with blade 400
Max cutting height at 45° mm. 97 with blade 400
Blade inclination (grades) 45
Blade lifting and inclination: programmed
Rotation speed of the main blade 3000-4000-5000 r.p.m.
Engraver blade rotation speed 8500 r.p.m.
Main blade motor power kW (HP) 50Hz 5 (7)
Engraver blade motor power [S1] kW (HP) 50Hz 0,9 (1,2)
Squaring capacity: with carriage 2600 mm n.d. / with carriage 3200 3200×3200 / with carriage 3800 3800×3200
Cutting width at the parallel guide mm. 1270
Suction mouth diam.:
– at the base mm 120
– at the hanging protection mm 80
– at the dividing knife mm n.a.

STANDARD EQUIPMENT
Warranty 10 years on the carriage sliding system 
Anodized aluminium extruded sliding carriage with sliding system on steel guides fastened by riveting system
Sliding carriage 3200 mm long
Standard 2-axis electronic control “READY” (the 3rd axis as optional) with:
– management of blade group inclination and lifting (management of the parallel guide: optional)
– setup of tool data with automatic correction of height size as to the inclination 
– Form: manual, half-automatic and automatic with 99 memorizable programs.
– Additional functions: calcolator and hour counter 
Squaring frame for quick positioning of the guide in angular cuts
Nr. 2 reversible stops on the squaring guide 
Extensions at the outlet table
57.01.25 Cutting width 1000 mm on parallel guide
57.01.28 Motor kW7 Hz50 (kW8 Hz60) kW7 HP 9,5 Hz50 (kW8 HP 11 Hz60)
Direct starting of the main motor by pushbuttons
Engraving group with independent motorization from the outside and blade quick re-positioning stops 
Emergency pushbutton on the front of the machine
Emergency pushbutton on the side of the parallel guide (E.C. version)
Magnetothermic protection
Protection at the blade assembled on the dividing knife (Versions with electric protections) with suction mouth diam. 60 mm
Protection at the blade assembled on the dividing knife (Versions with electric protections) with suction mouth diam. 60 mm
Automatic motor brake on the main blade (E.C. and USA/Canada versions)
Padlockable main switch
Transformer for auxiliary circuit 110 V
57.01.24 Partially excludable Hanging blade protection, with built-in suction, mouth diam. 80 mm
                 N.W. Already foreseen for SI400 NOVA in E.C. and USA/Canada versions

OPTIONAL

55.50.66 “READY 3” Version – Equipped with:
– Motorized parallel guide with electronic programmer
– Motor equipped with automatic star/delta starting 
* position readout on magnetic band
* adjustment in continuous through pushbutton 
* possibility of incremental deplacements
* automatic calibrating
* electronic visualization of position
* sliding guide on bar diam. 50 mm
* totally excludable guide under the worktable
* pneumatic self-locking system
* sensor for the automatic variation of the height of guide position, as to the profile of the guide in use (if high or low)
– Motor equipped with automatic star/delta starting kW9 HP12 Hz50 (kW11 Hp15 Hz60)

55.50.67 “READY 3 UP” Version – Equipped with:
– Motorized parallel guide with electronic programmer
– Orientable hanging control board
– Motor equipped with automatic star/delta starting 
* position readout on magnetic band
* adjustment in continuous through pushbutton 
* possibility of incremental deplacements
* automatic calibrating
* electronic visualization of position
* sliding guide on bar diam. 50 mm
* totally excludable guide under the worktable
* pneumatic self-locking system
* sensor for the automatic variation of the height of guide position, as to the profile of the guide in use (if high or low)
– Motor equipped with automatic star/delta starting kW9 HP12 Hz50 (kW11 Hp15 Hz60)

55.50.81 “READY 3 UP PLUS” Version – Equipped with:
– Motorized parallel guide with electronic programmer 
– Orientable hanging control board
– Motor equipped with automatic star/delta starting 
* position readout through encoder
* sliding on ball blow-by linear guide and motion by ball blow-by screw 
* adjustment in continuous through pushbutton or automatic positionings
* possibility of incremental deplacements
* automatic calibrating
* totally excludable guide under the worktable
* cutting width 1500 mm
– Motor equipped with automatic star/delta starting * kW9 HP12 Hz50 (kW11 Hp15 Hz60)

57.03.20 Sliding carriage 3800 mm long – squaring capacity with engraver 3800 mm

57.03.21 Start/stop pushbuttons on the top of the sliding carriage for statting the main blade, the engraver blade and their stop

57.02.33 Square guide with nr. 2 LCD readers for stop position – Each stop with ita micrometric adjustment is equipped with independent electronic reader with notifce system on magnetic band and visualization on LCD display

57.01.22 Guide for angled cuts on sliding carriage equipped with extendable stop for cutting sizes up to 1500 mm

57.01.23 Guide for angled cuts with compensation of the size as to the blade independently from the used angles, equipped with aluminium guide with stop

57.03.22 Squaring frame with CompeX device for angled cuts with automatic compensation of stop position.
                 – The exclusive system allows the working even when you apply the optional guide for complementary cuts.

57.03.10 Guide for complementary cuts to be applied at the standard squaring guide supplied with the machine.

57.01.62 Guide for parallel cuts on sliding carriage, quick installation on the carriage, equipped with millimetric rule.

57.01.57 Position electronic reader for parallel guide with manual deplacement and height visualization 
                 – Selector for high and low guide
                 – preset pushbuttons
                 – position readout on magnetic band
                 – possibility of absolute and incremental deplacements

57.01.25 Cutting width 1000 mm on parallel guide

57.01.26 Cutting width 1500 mm on parallel guide

57.01.07 Eccentric piece-tightening arm

08.06.41 Seaworthy packing with motorized parallel guide