TEL +39.85.95449 / +39.329.2736832 – E-MAIL: info@MakXilia.biz – WHATSAPP: +39.393.5129610
Machines for WoodWorking, Plexiglas, Aluminum, Polystyrene, Composite Panels (Alucobond), Recycling, etc.

Machines for WoodWorking, Plexiglas, Aluminum, Polystyrene, Alucobond, Recycling, etc.

Machines for WoodWorking, Plexiglas, Aluminum, Polystyrene, Alucobond, Recycling, etc.

VERTICAL CNC MACHINING CENTRE mod. MULTI RANGER RS 6321 - As per E.C. rules - PLASTIC

VERTICAL CNC MACHINING CENTRE mod. MULTI RANGER RS 6321 - As per E.C. rules - PLASTIC

Request a Quote
Product code: MULTI RANGER RS 6321 Category:

Description

VERTICAL CNC MACHINING CENTRE mod. MULTI RANGER RS 6321 – As per E.C. rules – PLASTIC
Space, two machines in one, speed, ergonomics, easy to use, are important words all summarized in the Multi Ranger RS 6321 Vertical Machining Centre.
The ratio between working table and occupied space is 1 to 1,21, which means 13,2 sqm of working table and 16 sqm of occupied surface, including the side protections and the safety photocells.
The Multi Ranger can be configured in many ways thanks to the availability of different working units. In this way this machine can be used for different kind of materials like fibre cement, plasterboard, paperboards, wood, laminated, foam, composites etc.
The large working table surface of the Vertical Machining Centre Multi Ranger RS 6321 allows a good optimization during more complex Nesting workmanships.
The machine can be equipped with an automatic vacuum sensor control switch for the independent discharge of each single working piece, avoiding that other pieces fall off.
The small space occupied, the reliability of the units and components make these Vertical Machining Centres a solution for all needs of cutting, sizing, milling and drilling with high accuracy, which is necessary for modern workshops or designer ateliers where prototypes are created or for service shops or small/medium productions.
The continuous needs of clients for modern and avant-garde furniture can easily be satisfied with the flexibility of the Multi Ranger RS 6321. The large vacuum working table and the possibility to choose between different machine compositions allow you to work a wide variety of wood based panelswhich can be easily and efficiently transformed.
This machine can be configured with two main units: one for milling and boring, the other for sizing and squaring.
The sizing unit can be equipped with a 250 mm circular saw blade which can swivel automatically at 0° or 90°. In this way it is automatically possible with very high precision to size, square, repeat sizing cuts and kerfing.
The milling unit equipped with an automatic tool changer TC6 allows you to mill, dirll and groove precisely, thanks to the numerical control and the sturdy structure.
The automatic 6 position tool changer TC6 runs together with the operating head during workmanship, therefore allowing a quick and efficient tool change in every point of the 13,2 sqm working table of the Vertical Machining Centre Multi Ranger RS 6321.

ADVANTAGES AND BENEFITS
– Minimum space occupied
– High safety standard
– Ergonomicity in loading and unloading
– Easy to be used and cleaned
– Vacuum locked panels on rectified surface
– Completely automatic
– No possibility of operator’s mistake
– Automatic tool change per each operation
– To mill shapes and curves
– To realize Nesting reducing working waste
– To realize an optimization of high efficiency
 
TECHNICAL DATA
Working capacity
: X 6300 – Y 2100 – Z 90 mm
Vacuum worktable with MDF sacrificial board: division in 3 zones – manual control
Vacuum pump: 2 x 250 m³/h
Axis speed: X 30 – Y 30 – Z 10 mt/min
Electrospindle Routing head (opt.) R33M: 3,3 kW – chuck collet ER32 – 18000 r.p.m.
Electrospindle Routing head (opt.) R22M: 2,2 kW – chuck collet ER25 – 24000 r.p.m.
Electrospindle Routing head (opt.) R55A: 5,5 kW (7,5 HP) chuck collet ER32 – 18000-24000 r.p.m.
Automatic Router Unit (opt.) TC6: Servo controlled – 6 positions – Iso 30 cones
Boring unit (opt.) D037: up to 6 mm – up to Ø 15/64”
Sawing unit (opt.) S180: 1,7 kW Motor / 180 mm Saw – 7,08’’ / 0-90° Swivel
Sawing unit (opt.) S250: 5 kW Motor / 250 mm Saw – 9,84’’ – / 0-90° Swivel
Total weight: about 3.600 Kg

Additional information

Weight 3600,0000 kg
Manufacturer

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

WoodWorking Machinery

Machines for Processing Composite Panels (Alucobond, Dibond, Alupanel, etc.)

Play Video
CNC MACHINING CENTERS, VERTICAL AND HORIZONTAL, FOR MACHINING ON COMPOSITE PANELS, MILLING, DRILLING, CUTTING, BENDING (Ventilated Facades – ACM – ACP – Alucobond® – Alpolic® – Dibond® – Larson® – Reynobond® – Alubond® – Albond® , Sandwich, etc.)

Polystyrene Processing and Recycling Machines (Eps)

COMPACTOR SHREDDER FOR POLYSTYRENE WASTE, EARN WITH YOUR WASTE PROBLEM

Contact us

for any information

Info on MakXilia

Do you need help ? Contact us