-19%

DUST EXTRACTION BENCH mod. DUST TABLE 3M – CE – mm. 1150×3000

 4.450,25 (Vat Excluded)

ACCESSORIES ON REQUEST…

SKU: DUST TABLE 3M Categories: ,

DUST EXTRACTION BENCH mod. DUST TABLE 3M – CE – mm. 1150×3000

It is an independent bench with built-in vacuum unit, so it does not need to be connected to an external/centralized suction system. It has a higher suction power and filtering surface than the “Dust Table E” model. This type of bench is suitable for the extraction and abatement of dust produced by sanding. It is built in folded galvanized sheet metal and equipped with a system for cleaning cartridges with compressed air jets. Its main characteristic is the filtration of the powders through cartridges pleated polyester aluminate antistatic. The powders are deposited in 2 extractable drawers. The outlet air is further filtered through acrylic fibre cells.

 

STANDARD EQUIPMENT OF EQUIPMENT:
– Transmission centrifugal electric aspirator
– Antistatic aluminum polyester cartridges
– Cells with acrylic filter output
– Drawers for dust recovery
– Electrical cabinet IP55
– Scratch-proof strips
– Compressed air filter cleaning system
** Single-phase motor in ATEX version can only be ordered with INVERTER (1.1 – 1.5 – 2.2 kW) – request quote

 

DIMENSIONS:
– Widht: 1150 mm.
– Length: 3000 mm.
– Quantity of cartridges: 4
– Cartridge dimensions: diam. 325 mm. / L. 1000 mm.
– Suction capacity: 2,2 kW
– Estimated air flow rate: 6,500 m3/hour
– Weight: 350 kg

Manufacturer

Ardesia

Shopping Cart
Scroll to Top
Do you need help ? Contact us