CIRCULAR PANEL SAW SQUARING MACHINE WITH DOUBLE TILT +/- 46° SCM GROUP Mod. L’INVINCIBILE SI-X – As per E.C. rules
Main blade diam. mm. 550
Engraver blade diam. mm. 160
Diametres that can be used simultaneously 550×160
Squaring capacity with carriage and extendable stop: with carriage 3200 mm 3200×3200 / with carriage 3800 mm 3800×3200
Max cutting height – blade at 90° mm. 205
Max cutting height – blade at 45° mm. 130
Max. cutting height – blade at -45° mm. 105
Tilting blade (grades) -/+46
Main blade rotation speed r.p.m. 2350-5200
Engraver rotation speed r.p.m. 6000
Main blade motor power kW 9 50Hz
Engraver blade motor power Hz50 kW 0,9
Cutting width at the parallel guide mm. 1500
Suction hood diam.:
– at the basemm 120
– at the pendant protection mm 100
10 years warranty on the carriage sliding system
Aluminium carriage with arch-shaped contact sliding system on steel hardened and rectified guides, fastened to the carriage through riveting system
“EASY TOUCH 7” electronic control, equipped with:
– CPU ARM, colour flat screen 7”
– direct management of the following working axis by manual, incremental manual, half-automatic, automatic method:
* lifting of the main blade, inclination of the blade group, parallel guide, lifting of the engraver blade, translation of the engraver blade, nr. of revolutions of the blade with inverter (optional on SI3 and SI5, standard on SIX)
* possibility to store up to 999 programs of work of the managed axis
* program of sequential sizes at the parallel guide to make max. 6 cuts by one program
– Assistance to the operator with the aid of the graphics for the solution of unknown values in workings of individual pieces, of composed manufactures with development and identification of the dimensional sizes and working angles, either of the guide on the table or of the blade
– Tool database
Function of assistance to the operator on electronic control, equipped with:
– identification of the right position of the stop on the squaring guide or the parallel guide in the squaring workings by inclined blade
– identification of the right position of the stop on the guide in the work by angled guide on the table with or without inclined blade
Orientable pendant control board.
Engraver group with independent motorization
Programmed parallel guide, sliding on THK – continuous current controlled axis, equipped with transmission through ball blow-by screw, max speed 25 m/min.
– guide body that can be excluded under the worktable, cutting width at the parallel guide 1500 mm.
Electronic adjustment of the engraver group for the motorized deplacement of translation and vertical movement of the engraver blade
– automatic insertion in working position by blade startup
– automatic exclusion by switching off
Support of the squaring frame with sliding on linear prismatic guides with ball blow-by sliding blocks
Squaring frame with CompeX device for angled cuts with automatic compensation of stop position
– The exclusive system allows the functioning even when the optional guide for complementary cuts is applied
Integrated on/off push buttons in the carriage
Eccentric piece-tightening arm
Version with sliding carriage 3200 mm.
97.05.45 Motor 9kW 50Hz (11kW 60Hz) Equipped with automatic star/delta starting: kW9 HP12 Hz50 (kW11 HP15 Hz60)
53.03.35 “Pro-Lock”, system for the quick locking of the main blade
Emergency push button on the front of the machine and on the side of the parallel guide.
Automatic star/delta motor starting
Pendant blade protection with built-in suction, mouth diam. 100 mm.
“AP system” for the automatic positioning of the pendant protection according to the blade inclination, SCM patent
Transformer for auxiliary circuit 110 V.
Automatic brake of the main motor.
Access door at blade replacement with quick locks and safety micro-switches.
Conformity certificate as per E.C. rules
57.03.17 “EASY TOUCH 12” electronic control , colour flat screen 12”
57.04.12 Expandable engraver blade – min. ÷max. thickness: 2,8 ÷ 3,6 mm – blade diam. : 160 mm – hole diam.: 20 mm – Nr. of teeth: Z 36
57.03.18 Cutting width at the parallel guide 1000mm.
53.01.00 Sliding carriage 3800 mm – Squaring capacity with engraver 3800 mm.
57.03.41 Superficial reinforcement treatment for sliding carriage and movable traverses of the squaring frame. Dedicated for intensive workings and those ones of very abrasive materials.
57.02.86 Extensions at the cast iron worktable
57.00.42 Squaring guide with nr. 3 LCD readers for stop position. Each stop is equipped with independent electronic digital reader with measurement system on magnetic band and visualization on LCD display
53.01.23 Guide for angled cuts on sliding carriage, equipped with extendable stop for cutting sizes up to 1500 mm.
57.00.44 Guide for angled cuts with compensation of stop position as to the blade independently from the used angles, equipped with aluminium guide with stop for dimensions up to 1500mm.
53.01.01 Guide for angled cuts with electronic visualizers and compensation of stop position as to the blade independently from the used angles, equipped with aluminium guide with stop for dimensions up to 1500mm. Independent digital readers for stop position and inclination angle. Measurement system on magnetic band and visualization on LCD display
53.01.30 “Full Support & Wireless” Orientabie frame for angled cuts equipped with Wireless function with manual deplacement with possibility of angle shots from +50° to -50° as to the perpendicular to the cutting axis with its micrometric adjustment. Measurement system on magnetic band and visualization on LCD display, updating in real time of stop position when blade inclination and/or cutting angle changes.
N.W. Code 57.00.42 Squaring guide with nr. 3 LCD readers for stop position already included.
57.03.10 Complementary cut guide to be applied to the standard squaring guide supplied with the machine
53.01.03 Support carriage for “Full Support” for an easy removal, equipped with wheels and mechanical lifting by handwheel
57.00.45 Guide for parallel cuts on sliding carriage, quick installation on the carriage, equipped with millimetric rule, extension of the stop for cutting sizes up to 1000mm and millimetric reference system for the 1st trimming cut
53.01.12 Guide for parallel cuts on sliding carriage with LCD visualizers, quick installation on the carriage. Equipped with electronic digital reader with reference system on magnetic band and visualization on LCD display. Equipped with extension of the stop for cutting sizes up to 1000 mm and millimetric reference system for the 1st cut
53.01.17 Presser on the whole length of the carriage, equipped with nr. 2 pneumatic pressers with centralized control; working capacity: – 3030 mm with sliding carriage 3200 – 3650 mm with sliding carriage 3800
53.01.18 2nd frame with support for the sliding of the rail to support great panels
11.11.98 Auto-transformer for tensions 220V, 230V, 600V N.W.: obligatory when the inverter for tensions 220V, 230V e 600V is foreseen.
57.02.87 SAV€NERGY Intelligent management system of the energetic consumptions of the machine for waste elimination
N.W. It’s obligatory to select the optional inverter
57.03.42 Additional eccentric piece-tightening arm
08.03.89 Seaworthy package