Description

CNC WORKING CENTER CASADEI BUSELLATO mod. JET OPTIMA S20 WF – PLUS – As per E.C. rules
X = 3060 mm Y= 1550 mm Z = 180 mm
C.N.C. working center, equipped with:
• Automatic centralized lubrication
• Remote control panel
• Nr. 4 attachments for counterblocks
• Nr. 1 compressed air connection
• Nr. 2 work areas (X)
• Nr. 6 worktables “IMC” 1550 with double wire “0”
• Nr. 18 sucker / locker trolleys
• Nr. 6 suction cups 80×155 (IMC)
• Nr. 6 suction cups 55×155 (IMC)
• Nr. 6 suction cups 155×155 (IMC)
• Panel lifting with 4 bars (IMC)
• Predisposition of IMC manual locks
• 0÷360° NC device for electrospindle 
• Pump 90 m3/h
• Head TFM 18 with integrated blade (12V+4X+2Y)
• Electrospindle 11 kW (S6)
• Magazine RP16 – HSK F63
• Magazine LINEAR 10 – HSK F63
• Machien management software “Genesis Evolution”
• Programming software “Jet Cad”
• Teleservice

GENERAL FEATURES
C.N.C. working center with bar work table and cantilever structure for working wood and materials with similar physical characteristics: 
• vertical drilling on the surface of the panel 
• horizontal drilling on 4 sides of the panel 
• milling with disc cutter integrated in “X” direction 
• generic milling

STANDARD EQUIPMENT

Base and worktable
• Base and upright in electro-welded steel
• Electric panel integrated in the base
• Worktable available in 2 lengths and fitted with “IMC” (Interchangeable Modular Cups) tables in sturdy closed aluminium structure
The tables slide on round hardened and ground guides and are complete of:
– rear reference with 22 mm diam. retractable stem for positioning the panel in push
– front reference (double wire “0”) with 22 mm diam. stem. for double work area and processing of narrow pieces 
– integrated vacuum and compressed air distribution system 
• The machine is equipped with a centralized lubrication system with progressive distribution
• Centralized suction system with conveyor equipped with automatic partialization managed by control

Mobile upright and operating group
• Mobile upright with welded steel structure and internal ribs
• Operator group for vertical and horizontal drilling with independent spindles made of light aluminium alloy with high mechanical properties
• The movement of the X axis takes place via pinion and rack with convex and rectified helical teeth covered with dry lubricating film
• The movement of the Y and Z axis takes place via ball screw and preloaded nut
• The motorization of the axis is carried out by means of Brushless motors powered and controlled by parameterized digital drives

Drilling head
• Working unit for vertical and horizontal drillings with independent spindles in light aluminium alloy sliding on preloaded ball bearing slides and on 2 high precision linear guides in hardened and ground steel
• 12 drill chucks with “T” shaped vertical axis outlets with a 32 mm center distance (7X – 5Y)
• 2  twin-spindle heads for horizontal drilling oriented in X with a 32 mm center distance
• 1  twin-spindle head for horizontal drilling oriented in Y
• 1 integrated blade group ø 120 mm oriented in X. 
Tool attachment is designed for cylindrical shank with diam. 10 mm.

Magazines
• Magazine LINEAR 10 – HSK F63. Linear magazine with 10 stations for main milling unit with HSK-F63 attachment, mounted on the right.
Overall height 220/240 mm, max tool diam. 170 mm, pliers center distance 110/160/180 mm
• Magazine RP-16 – HSK F63. Automatic magazine with 16 stations. The revolver with grippers completely embedded in the metal structure is placed on the rear of the machine upright.. Very resistant structure sliding on preloaded recirculating ball bearings and on 2 high precision linear guides in hardened and ground steel. It can be used by several milling units as long as they are aligned on the X axis. Pliers center distance 160 mm., max tool diam. 240 mm.

Numerical control
Numerical control with “Genesis Evolution” interface dedicated to the boring and milling machines of the wood sector installed on personal computer: 
Windows operative system 
Colour LCD video 
Querty keyboard 
Machine interface software “Genesis Evolution”
Mobile console
General software features:
– CAD manipulation tools
– Operator interface in language (I – GB – D – E – F)
– Multitasking operating system for using the control even when the machine is working
– Graphic display of the 6 machinable faces
– 2D and 3D visualization of the workpiece
Programming:
“JET CAD” Latest generation CAD/CAM programming system with integrated environment that can operate both in the field of design only and on the machine.
High performance graphic editor with typical functions of a CAD drawing program:
– Interpretation and production of different (DXF, ISO) and customized drawing formats
– Database of totally customized processes
– Multiple options in custom information configuration
– parametric graphic programming 
– programming of machining on horizontal, verticali and fictitious faces
– programming of single, multiple holes (for multi-point tool), fitting on flat face and side faces
– absolute and incremental programming
2D Simulation  and time calculation
It allows to see a 2D simulation of the processes present on a program and to check the real time of execution of the piece
Features:
– graphical representation of the worktable (without traverses and suction cups) and of the configuration of the head including any warehouses
– graphic visualization of the work in progress
– fully configurable graphical interface 
Wood System Control Machine Module
Graphic environment for equipping the support surfaces and the suction cups that make up the workbench. The program allows you to simultaneously view the pieces to be worked and the workbench complete of the tables and suction cups really present in the machine. 
Optimal positioning of the elements of the bench that ensures correct sealing of the piece without incurring interference between clamping devices and tool.
At the end of the operations the system provides information for manual or automatic placement based on the machine configuration
TELESERVICE – remote assistance system via internet 
It allows the connection of the machine supervision PC with the assistence service via the Internet. 
Software: connection program that allows to make: 
• visualization of the operator interface 
• signal diagnosis 
• online verification and modification of the status of the configurations, parametres and programs 
• data backup and file transfer operations 
• upgrade operations of the machine logic and the operator interface 
N.W. An internet connection is required by the customer. If the connection in remote during the warranty period is not allowed by the customer who specifically requests a technical intervention at his headquarters and, after this, the technical interventions shows that the problem could have been solved with the connection denied, the technical intervention will be considered for a fee.

Quality and safety checks
Assembling by carrying out conformity tests according to specific test plans. 
The machine in the basic configuration includes safety protections in accordance with the Countries where they are required.

TECHNICAL FEATURES

Axis
Useful working range X – Y – Z: 3060–1550–180 mm
Panel loadable in Y 1900 mm (2250 mm optional)
Piece passage in Z 250 mm
Linear speed X – Y – Z/axis:  X = 60 Y = 50 Z = 15 m/1′
Vector speed – X – Y/axis: 78 m/1′

Work plan
N° plans – N° suction cups per plans: 6-3 tipo “IMC” 1550
N° attachment per counterblocks 4
Vacuum pump 90 m3/h

Drilling head
Vertical spindles 12 (7X – 5Y)
Horizontal spindles 6 (4X – 2Y)
Integrated blade in X 120 mm
Motor power 1,7 kW

Electrospindle
Std power (S6) 11 kW
Max speed 24.000 r.p.m.

Magazine
Tool magazine on the base side Linear 10: 10 stations
Rotative magazine RP/16: 16 stations

Lubrication
Automatic centralized lubrication

Installation (indicative values)
Installed power 16/22 kW
Compressed air consumption (1 attachment) 210 NL/min
Air intake consumption 5400/5800 m3/h
Suction air speed 28/30 m/sec
Suction mouth diam. 250 mm
Total weight of the machine 3.300 kg

NOTE: 
Vacuum pumps can be used up to an height of 800 m above sea level. To change the calibration, use the appropriate codes inclued in the paragraph «Various working centers» 

NOTE: 
The machine is designed to be connected to a 400 V 3-PGASE+NEUTRAL power supply network 
In the absence of the NEUTRAL conductor it’s necessary to mount one of the autotransformersincluded in the paragraph «Various working centers» 
The machine isn’t protected against electrocution risks due to indirect contacts. 
Protection against indirect contacts of the machine is the customer’s responsability.
In this regard, it’s specified that in the plants of: 
• TT type, powered by the low voltage public distribution network, 
• TN type powered by the medium voltage public distribution network. 
The power supply line of the machine must be protected by a differential switch: 
• dedicated (type B recommended), independent from that of the plant or other users, 
• adjustable both in current (recommended 0,03 – 0,3 – 1 A) and in time (recommended 0 – 0,3 – 1 – 3 S.), 
• suitably coordinated with the user’s earthing system (ref. IEC 60364-4-41; HD 60364-4-41). 
For environments with a higher risk of fire, the maximum value of the differential tripping current is 1A (even with delayed tripping). 
In the case of TN-type systems, the system must be of the TN-S type with separate neutral and protective conductor (IEC 60364-4-482; HD 384.4.482).

OPTIONAL BASIC MACHINE:

FB0000 CE Regulations – Machine execution compliant with CE regulations

FB0697 Adaptation eelctrical requirements for USA/Canada (no marking)

FB0890 “Jet Super” loading in “Y” 2250 mm
Enlarged fairing to allow loading in Y of panels up to 2250 mm
N.W. On Jet Optima C21 versions C,D,E,F it’s obligatory to select the magazine Linear 10

FB0456 Air conditioning of the electrical cabinet
The system allows to keep the temperature inside the electrical cabinet at adequate levels and to guarantee insulation from external dust.
N.W. Recommended when the ambient temperature is above 35°

FB0496 Start-up tool kit for working the cabinet

FB0494 Supplement for 4 work areas (X/Y)

Only for versions WF

FB0202 Chip conveyor belt for Jet Optima

Only for versions WF XL

FB0203 Chip conveyor belt for Jet Optima XL

OPTIONAL FOR “IMC” TABLES:

FB0478 Supplement for 2 additional tables with double wire”0″ for Jet Optima S20 WF
N.W. It requires sucker / locking trolleys

FB0951 2 additional tables with automatic positioning with double wire”0″ for Jet Optima S20 WF
N.W. It requires positioning with suction cup-table/locking floating aggregate
It requires sucker / locking trolleys for tables with automatic positioning

FB0475 Triple wire “0” supplement for JET OPTIMA S with 2 areas – (3+3 in push)

FB0670 Triple wire “0” supplement for JET OPTIMA S with 4 areas

FB1097 Triple wire “0” supplement for additional tables
N.W. Obligatory to select the 3rd wire “0” and additional tables

FB0254 Cross laser device for positioning of suction cups
N.W. For Jet Optima C21, only for versions A e B

FB0027 Display for table and suction cup dimensions (each table)

FB0028 Kit of safety sensors on references for 6/8 tables

FB0826 Supplement panel lifting with 4 bars with 3 positions (IMC) – It replaces the standard equipment.

FB0825 Supplement panel lifting with 6 bars (IMC) – It replaces the standard equipment.

FB0827 Supplement panel lifting with 6 bars with 3 positions(IMC) – It replaces the standard equipment.
N.W. On Jet Optima S, only for version Plus.

FB0856 Supplement panel lifting with 6 bars with 3 positions (IMC) – It replaces the standard equipment.
N.W. On Jet Optima S, only for version Full.

FB0034 Kit references for veneers for manual insertion for IMC tables

“JET FAST” AUTOMATIC POSITIONING WITH FLOATING AGGREGATE

FB0945 “Jet Fast” Positioning with table-suction cup/locking floating aggregate (6 tables)
Automatic IMC lock predisposition is required to move the locks
N.W. For Jet Optima S and Jet Master (version with 6 tables)

FB0946 “Jet Fast” Positioning with table-suction cup/locking floating aggregate (8 tables)
Automatic IMC lock predisposition is required to move the locks
N.W. For Jet Optima S XL and Jet Master XL (version with 8 tables)

IMC SUCTION CUPS:
Max. 4 suction cups per table

FB0018 Suction cup/locking trolley
Per nr. Suction cup/lockings on the table In addition to the standard equipment

FB0849 Suction cup/locking trolley for table with automatic positioning

FB0020 Cover for IMC trolley

FB0021 Suction cup 155×155 mm (IMC)

FB0022 Pantograph type suction cup 155×155 mm (IMC)

FB0023 Suction cup 80×155 mm (IMC)

FB0024 Suction cup 70×155 mm (IMC)

FB0025 Suction cup 55×155 mm (IMC)

FB0026 Suction cup 40×155 mm (IMC)

FB0537 Rotatable suction cup 155×155 mm (IMC)

FB0538 Rotatable suction cup 80×155 mm (IMC)

IMC SUCTION CUPS WITH MAGNETIC COUPLING:
Max. 4 suction cups per table

FB1035 Supplement for trolleys/suction cups with magnetic coupling BASIC version – It replaces the standard euipment with magnetic coupling trolleys/suction cups

FB1036 Supplement for trolleys/suction cups with magnetic coupling XL version – It replaces the standard euipment with magnetic coupling trolleys/suction cups

FB0539 Trolley with magnetic coupling – For nr. suction cups/lockings on the tables. In addition to the standard equipment.
N.W. It requires the supplement of trolley with magnetic coupling

FB0850 Trolley with magnetic coupling for automatic positioning table – For nr. suction cups/lockings on the tables. In addition to the standard equipment.

FB0546 Cover for IMC trolley magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0547 Suction cup 155×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0548 Pantograph type suction cup 155×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0549 Suction cup 80×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0550 Suction cup 70×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0551 Suction cup 55×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0552 Suction cup 40×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0553 Rotatable suction cup 155×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

FB0554 Rotatable suction cup 80×155 mm (IMC) with magnetic coupling
It requires magnetic coupling system for suction cups and locks

IMC LOCKS:

FB0824 Arrangement of automatic IMC blockages
N.W.: Available only with machine equipped with automatic positioning of tables and suction cups from NC

FB0491 Kit of 6 IMC locks Ø 158 – It requires predisposition of locks
N.W.: It requires the arc/stub alignment laser for processing the arc element.
For Jet Optima S, for version Plus, only.

FB0493 IMC Ø 158 lock – It requires arrangement and kit of locks 

FB1038 Supplement for suction cup/lock trolleys with magnetic coupling, version FULL BASE – It replaces the standard euipment suction cup/lock trolleys with magnetic coupling

FB1039 Supplement for suction cup/lock trolleys with magnetic coupling, version  FULL XL – It replaces the standard euipment suction cup/lock trolleys with magnetic coupling

FB0555 Kit of 6 IMC locks Ø 158 with magnetic coupling – It requires predisposition of locks – It requires trolley with magnetic coupling 
N.W.: It requires the arc/stub alignment laser for processing the arc element.
For Jet Optima S, for version Plus, only.

FB0556 IMC lock Ø 158 with magnetic coupling – It requires predisposition of locks – It requires trolley with magnetic coupling 

FB0557 Kit of lock extension for elements from 92 to 138 mm thick
N.W. It requires the base-clamp group, not included 

FB0568 Kit of lock extension for elements from 138 to 158 mm thick – Only linear workings and with trolleys on mechanical references of the table
N.W. It requires the base-clamp group, not included 

FB0050 Horizontal IMC lock – Not available with the system of magnetic coupling – It requires predisposition of manual locks – Min. piece height 60 mm

FB0059 Arc/stub alignment laser in Y

FB0060 Stub alignment laser in X

VACUUM PUMPS:
N.W. Vacuum pumps can be used up to an height of 800 m above sea level. To change the calibration, use the appropriate codes included in the paragraph «Various work centers»

FB0542 Additional pump 90 m3/h

DRILLING HEADS

FB0821 Supplement head 26M with integrated blade – (18V+4X+4Y+blade)
N.W. For Jet Optima C21, only for versions C, D, E, F

GROUPS WITH HORIZONTAL MOTOR WITH HORIZONTAL OUTPUTS:
Application according to configuration schemes

FB1004 Horizontal milling group with 2 outputs 3,3 kW – ERG 32
N.W. Only for version Plus

FB1007 Horizontal milling group with 2 outputs and double position in Y 3,3 kW – ERG32 
Application according to configuration schemes. In the machine there is no drilling head.
N.W. Only for version Plus

GROUPS WITH VERTICAL MOTOR WITH HORIZONTAL OUTPUTS:
Application according to configuration schemes

FB0840 Cutter/blade group with 2 outputs 0-90° 4 kW ERG25/32

VERTICAL MILLING GROUPS:
Application according to configuration schemes

FB0112 Vertical milling group 7 kW right rotation – ERG32
N.W. On Jet Optima P and Jet Optima S, only for version Plus

FB0113 Vertical milling group 7 kW left rotation – ERG32
N.W. On Jet Optima P and Jet Optima S, only for version Plus

ELETTROMANDRINI HSK F63: con raffreddamento a liquido

FB0837 Supplemento Elettromandrino 15 kW (S6) 24000 RPM – HSK F63 – Completo di sistema di refrigerazione

OPZIONALI ELECTROSPINDLES AND MAGAZINES:

FB0081 Swiveling chip protection device on Electrospindle – It requires the 0-360° NC device

FB0084 Rotary magazine BT 10 stations – HSK F63 – Magazine on the head. Pliers center distance 126,5 mm

FB0819 Supplement for magazine RP 24 – HSK F63

WORK HEADS HSK F63:
Use subject to the spedcific working heights of the machine

FB0595 Tilting manual head with 1 output blade 180/cutter HSK-F63 ERG25 COMPACT
Without 0-360° it can be used with limitations
N.W. It requires the PT1 magazine

FB0123 Tilting manual head with 2 horizontal outputs – blade diam. 140mm – ERG25 – HSK F63
Without 0-360° it can be used with limitations
N.W. It requires the PT1 magazine

FB0124 Cutter/blade head with 2 horizontal outputs – blade diam. 220mm – ERG32 – HSK F63
It requires the 0-360° NC device

FB0398 Head with 4 horizontal outputs – HSK F63
It requires the 0-360° NC device

FB0126 Head for horizontal workings – cutter L=130 mm – ERG32 – HSK F63
On Jet Optima C21 – RT21: Without 0-360° it can be used with limitations
On all other models: It requires the 0-360° device

FB0127 Notching head – diam. max. 70mm – HSK F63
It requires the 0-360° NC device

FB0128 Counter-supported head – diam. max. 100mm – HSK F63
It requires the 0-360° NC device

FB0530 Head with copier and floating ring – ERG 32 – HSK F63
It requires air line on electrospindle or 0-360° device

FB0562 Head with floating side feeler – HSK F63
It requires the 0-360° device

FB0132 Blade head max diam. 250mm – HSK F63
It requires the 0-360° NC device

FB0133 Blade head max diam. 300mm – HSK F63
It requires the 0-360° NC device

FB0134 Head for hinges – distance between centers 48-6 – HSK F63
Senza 0-360° CN utilizzabile con limitazioni

FB0135 HSK-F63 drilling head with 2 horizontal outputs – cylindrical attachment
It requires the 0-360° NC device

FB0531 Cutter/blade head with 1 output with variable tilting managed by NC (Qin_X)
Including tool tilting adjustment devices 
It requires the 0-360° device
It requires one of the following types of magazine PT1, or PT2, or RP/16 or RP/24

HARDWARE DEVICES

FB0121 Software for barcode + wireless reader + power supply

OPTIONAL SOFTWARE: 

FB0606 JET WINDOWS BASE (software for doors and windows) – Installation and training not included in the price

FB0607 UPGRADE JET WINDOWS EVOLUTO (software for doors and windows) – Installation and training not included in the price

FB0118 JET CABINET – Installation and training not included in the price

CAD/CAM ALPHACAM

FB0743 Software CAD/CAM Alphabase – Installation and training not included in the price

PACKAGING:
N.W. For container loading it’s mandatory to select a package

FB0846 Pallet with “cocoon” bag versions WF

FB0676 Pallet with “cocoon” bag versions WLF o WF XL

THE FOLLOWING MODELS ARE ALSO AVAILABLE:

JET OPTIMA S20 WF XL – PLUS // X = 5460 mm Y= 1550 mm Z = 180 mm

JET OPTIMA S20 WF – FULL // X = 3060 mm Y= 1550 mm Z = 180 mm

JET OPTIMA S20 WF XL – FULL // X = 5460 mm Y= 1550 mm Z = 180 mm