Description

AUTOMATIC EDGE BANDING MACHINE SCM GROUP Mod. MINIMAX ME20 – As per E.C. Rules

Technical details:
– working table dimension 1950×180 mm
– working table height 904 mm
– min/max edge thickness 0,4/2 mm
– min/max working thickness 12/50 mm
– min. working length/width 180/65 mm
– motorized feeder speed 6 m/min
– trimmers cutting speed 12.000 r.p.m.
– trimmer/copying devices speed 9000 r.p.m.
– carbide tip tools diam. 70 mm 4 teeth
– aspiration outlet diam. 120 mm
– working temperature 190 degrees C
– feed motor power 0,18 kW
– trimming motor power 0,55 kW
– glue pot motor power 0,18 kW
– total weight 270 Kg

Standard equipment:
– machine base made of enblock steel to ensure that the machine is stable and rigid, keeping the adjustments
– electric control panel positioned on the upper machine part to facilitate its use in any working condition
– sliding table made of anti-scratch material
– telescopic front support with support rollers for a total surface of 1950×550 mm
– automatic edge loading system for rolled edges with pneumatic shear for the coil cut
– powered and automatic edge feeding at workpiece infeed
– automatic end cutting unit with pneumatic workpiece locking to cut the front and rear edge at 90 degrees
– 3 edge pressure rollers on the panel:
* 1 rubber coated (fixed)
* 1 rubber coated (oscillating)
* 1 nylon (fixed)
– electrical cabinet with padlockable main switch
– glue temperature electronic control.
Glue temperature lowering at 150 degrees, in case of temporary machine non-use, avoiding eventual glue burning (quick machine re-start).
– Digital readout of temperature
– Aluminium glue pot with 5 glue heating elements to ensure an uniform glue temperature in the glue pot.
Micrometric glue adjustment (with knob) on the spreading roller.
Self-adjustment of glue spreading roller projection, according to the panel and the edge thickness to be glued.
– top & bottom trimming unit for the trimming of the top and bottom exceeding edge equipped with chromium plated copying pads to improve the panel sliding
– numerical readouts for cutters adjustment on the trimming unit (mm/inches).
– coil holder plate, 530 mm diameter
– panel movement system by means of top powered feeder
– panel thickness adjustment by means of handwheel with numerical readout (mm/inches), automatic set up of Feeder and Trimming units to the selected height
– centralized exhaust system, 120 mm diameter
– filter system for long chips
– anodized aluminium outfeed fence