PNEUMATIC JOINING MACHINE FOR ASSEMBLING FRAMES Mod. JOINT-5×5-Super WITH FIXED CARRIAGE. As per E.C. rules
Machine to join frames with pneumatic operation, very sure and reliable. Pushing the pedal, the frame stops and clips automatically are inserted.
It runs by compressed air with an only feed of 8 atm.
It uses clips mm. 4-7-10-12-15 high.
It can join either frames with angle 90 degrees or angles at 120 degrees (hexagon, like optional) and 135 degrees (octagone, like optional) with the min. section mm. 5×5 and the max. mm. 100×80.
This model has the adjustment of the frame clamping force and the adjustment of the down speed of the upper presser, the frame frontal clamping device to obtain a perfect quality of the assmbling and the pneumatic clamping of the square to facilitate the insertion of parallel clips.
Furthermore, the machine has the possibility to choose between manual cycle and automatic one in order to control the perfection of the angle to be assembled before going on inserting clips: it is currently equipped with the clip-test device and for several laid-upon clips.
It’s the ideal machine for frame-makers and for current productions of medium/small not much-shaped profiles.
Min. profile dimensions mm. 5×5
Max. profile dimensions mm. 100×70
Clips mm. 4-7-10-12-15 high
Store capacity: nr. 250 clips
Pneumatic feed 8 bar
Air consumption (per working cycle) 1,60 Nl at 7 bar
Number of cycles (at the maximum speed) 50 per minute
Overall dimensions mm. 350x450x320
Weight kg. 31
Automatic and manual operation