SHREDDER mod. M-1 XL Motor kW 15 – Width 700 mm. – Equipped with horizontal scroll for material ejection
The shredders are suitable for grinding wood, pallets, paper, cardboard, and so on. It consists of:
A weight-bearing structure consisting of an assembly of different thicknesses of sheet metal to ensure sturdiness and to eliminate noise as far as possible during operation.
All the parts of the structure are snap-connected to ensure alignment and maximum precision.
PLC-controlled hydraulic unit for moving the feed box. Rotor in special steel made of a single body on which the cutting tools are mounted provided with four cutting edges bits in Special steel.
The tools can be changed easily when they are worn out or broken because they are fixed with screws.
Counterblade in hardened shock-resistant steel.
Power cabinet that encloses all the safety devices and guards, provided with a PLC that controls the hydraulic panel during operation of the machine and manage the reverse of the rotation direction of the rotor in case of jam.
Direct-drive reduction unit with cast iron body provided with radial bearings with two crowns of rollers and a reaction arm to prevent violent blows.
• Outlet dimensions according to grid dimensions, 10 Ø to 25 Ø.
• Cutting blades: 30×30 – concave face.
• Noise level 70+80 dB(A) — depending on material type.
- A 1500 mm.
- B 1615 mm.
- C 1360 mm.
- D x E 1400 x 700 mm.
- Weight Kg 1500.
- Rotor 240 x 700 mm.
- Motor kW 15 IE-2/3 (high efficiency.
- Hydraulic power kW 0,75.
- Installed power kW 15,75.
- Number of blades 28+4.
- Output Kg/h 150/350.
- Outlet dimensions according to grid dimensions, 10 Ø to 25 Ø
- Cutting blades: 30×30 – concave face
- Noise level 70+80 dB(A) — depending on material type.
- Voltage 400V – 50 Hz.
NOTE: The output depends on the type of material and the grid.
N.W.: The values indicated are purely indicative and may vary depending on the kind of material.
The constructor reserves the right to make changes at any moment.