LOG SAWING MACHINE (SAW MILLS) Mod. LT15START
The LT15START is the ideal and economical log saw for simple processing of wood, has a robust construction and simple characteristics. Carpenters, farmers, producers and builders who want to save money by producing their own timber themselves will be amazed by the LT15START that will exceed their expectations to be a basic level log saw.
The LT15START is ideal for cutting logs 70 cm long by 5.4 m long with the standard rail. To cut longer logs you can add extension rails to reach the desired cutting length.
The log saw has a push feed and a manual crank to reposition the blade for the next cut.
Thin-cutting blades require minimal energy consumption so that the 5.5 kW motor can provide enough energy to cut any type of wood. The LT15START is equipped with a 14 HP petrol engine.
The logs are fixed to the track by means of two pliers and three adjustable side brackets. The height of the head is precisely positioned by means of a crank and the cut is obtained by constantly pushing the head along the trunk with a slight pressure. Once the cut is complete, the head is lifted, then pulled back and positioned in the position for the next cut.
A water tank lubricates the blade directly to improve cutting performance and keep the blade clean. The adjustable blade guide arm supports the blade when cutting various sizes of material. The blade tension is easily adjusted while maintaining the right tension during cutting.
The loading ramps (optional) facilitate the loading of large logs thanks to the wedges for logs that allow to level tapered logs and ensure maximum return. By adding extension rails, longer logs can be cut.
5.5 kW Electric
7.5 kW Electric
14 CV Petrol
Diameter 70 cm
Maximum cutting width 64 cm
Max. prism width 59 cm
Max. cutting depth 27 cm
HEAD FEATURES AND OPTIONS
Cutting Meter – Setworks N/A
Head High/Low Crank
Head Forward/Backward Manual
Manual Blade Guide Arm
Lubrication system Blade Manual valve
Tensioning System Screw with pressure gauge
Cutting Engraving Machine N/A
Diameter of the sawdust collecting door 101.6 mm (4′)
Additional options N/A
Length 4010 mm
Width 32 mm/ 35 mm
Flywheel diameter 483 mm
Cast iron material
BED FEATURES AND OPTIONS
Construction of the track Double track
Angled tracks N/A
Extension Rail Sections Additional tracks: 1.95 m or 2.7 m
Trailer package Optional
Rail S3 (3 segments of 1.95 m each): 6 side brackets, 3 manual torso clamps
M2 track (2 segments of 2.7 m each): 4 side brackets, 2 manual torso clamps
STANDARD Hydraulic N/A
SUPER Hydraulic N/A
SAWMILL FEATURES AND OPTIONS
Frame Construction Semi-Cantilever
Energy consumption requirements 400 V / 11 A (5.5 kW)
400 V / 16 A (7.5 kW)
Ramps for loading
Planer/Roll forming line MP100