Description

PNEUMATIC CUTTING-OFF SAW TR-series – As per E.C. rules
COMPLETE WITH:
– working table mt. 1 on he right of the blade
– working table mt. 1 on the left of the blade
– fall skid for trimmed pieces
– hand-guard 2-hand control
– Widia blade
– protection grid on the cutting area

TECHNICAL FEATURES
Motor power HP 4
Blade diameter mm. 350
Blade revolution 3000 r.p.m.
Table height from the floor mm. 800
Operating pressure bar 8
Sawdust hoods n. 2x diam. 80
Net weight Kg. 150
Air consumption/cycle NI 6

STANDARD EQUIPMENT:
Pneumatic blade feed
Two-handed safety starting system
Self-braking motor
Working area safety grill
Variable blade feed speed
TCT saw blade diameter mm.350
Wotking table of 1 mt left from the blade
Working table of 1 mt right from tha table

AVAILABLE MODELS
TR/350 – HP 4, blade diameter 350 mm. , truncated capacity: section 160×80 or 220×30 mm.
TR/450 – HP 5,5, blade diameter 450 mm. capacity to truncate: section 250×95 or 330×30 mm.
TR/501 – HP 10, blade diameter 500 mm. capacity to truncate: section 280×135 or 360×55 mm.
TR/600 HYDRAULIC – HP 12, blade diameter 600 mm. capacity to truncate: section 365×160 or 610×30 mm.
TR/601 HYDRAULIC – HP 12, blade diameter 600 mm. capacity to truncate: section 300×200 0 660×30 mm.

ACCESSORIES
ZA076 – MACHINE BASE INCLINED 10 DEGREES
ZA069 – EXTENSION LENGTH ROLLER CONVEYORS MT. 1
ZA074 – WIDIA DIAM. MM. 350 blade
ZA072 – MANUAL SIDE REFERENCE
ZA073 – PNEUMATIC SIDE REFERENCE
ZA033 – Widia blade diameter 350 mm.
ZA078 – Extension length of roller conveyors mt.1 (Rollers Ä 60 mm.)
ZA081 – Manual lateral reference (60 mm.)
ZA082 – Manual lateral reference (250mm.)
ZA083 – Pneumatic lateral reference (60 mm.)
ZA084 – Pneumatic lateral reference (330 mm.)
ZA085 – Oversized engine Hp. 7,5
ZA087 – Machine on inclined base (8 piece)
ZA077 – Laser powered at 220 V.
ZA315 – Front pneumatic protection (TR501/P)
ZA329 – Full cut area protection (TR501/G)
ZA088 – Widia blade diameter 500 mm.
ZA318 – Extension length of roller conveyors mt.1 (Rollers Ä 90 mm.)
ZA316 – Manual lateral reference (60 mm.)
ZA317 – Manual lateral reference (400mm.)
ZA067 – Widia blade diameter 600 mm.
ZA089 – Extension length of roller conveyors mt.1 (Rollers Ä 90 mm.)
ZA092 – Pneumatic lateral reference (60 mm.)
ZA093 – Pneumatic lateral reference (550mm.)
ZA087 – Machine on inclined base (8 piece) 400

ELECTRONIC STOP BPE-series
– casehardened, hardened and groundsliding guide
– axial bearings
– toothed belt drive
– double pneumatic clamping after reaching the required height
– speed control by means of inverter
– half-automatic and automatic cutting cycles
– setting of cutting sequences by programmer on board machine
– data inserting and management by programmer on board machine
– 99 programmable working cycles
– 15 programmable sizes per each cycle
– working stroke from mm. 3000 to mm. 7000
– positioning speed 40 mt/min.
– return speed 40 mt/min.
– positioning precision +/-0,5 mm.
N.W.: It must always be ordered with a roll bench ref. ZA102/ZA103

AVAILABLE MODELS
BPE 3000 – lungh. mm. 3000
BPE 4000 – mm. 4000 long
BPE 5000 – mm. 5000 long
BPE 6000 – mm. 6000 long
BPE 7000 – mm. 7000 long
BPE 8000 – mm. 8000 long
BPE 9000 – mm. 9000 long

Accessories for ELECTRONIC STOPS BPE-series
ZA102 – MT. 1 ROLL BENCH WITH IDLE ROLLS (ROLL DIAM. MM. 60)
ZA103 – MT. 1 ROLL BENCH WITH IDLE ROLLS (ROLL DIAM. MM. 90) – code ZA103
ZA104 – PNEUMATIC LIFTING OF THE STOP WITH TEMPORIZED DESCENT – Recommended with motorized carpets of the MBC-series
ZA105 – LENGTH MORE THAN MM. 7000

MOTORIZED CARPET MBC-series available in the following models:
MBC/2000 – MBC/3000 – MBC/4000 – MBC/5000 – MBC/6000 with the following accessories:
ZA104 – PNEUMATIC LIFTING OF THE STOP WITH TEMPORIZED DESCENT
ZA106 – LENGTH MORE THAN MM. 7000

ZM130 – ELECTRONIC SELECTING DEVICE WITH QUICK CYLINDERS to be combined with the mod. TR/350-450-500
Functional for unloading individual bars; not assured the functioning for the simultaneous unloading of multiple bars.
Not combinable with the automatic cutting-off machines Matrix1 or Matrix2 – left type.
Min. length of the piece to be unloaded by the mod. Matrix1 or Matrix2: 300 mm.
Min. length of the piece to be unloaded by the mod. Matrix3 or Matrix4: 100 mm.
Basic supply:
– Motorized carpet mt. 3
– Nr. 3 quick expelling cylinders
– Unloading carpet with variable speed (mt./min. 0-120)
– Carpet mm. 270 wide
– Adjustable position of expelling cylinders
– Coupling of size/corresponding unloading to be programmed on board machine
Accessories of the a.m. SELECTING DEVICE:
ZA114 – Additional cost for oversize carpet length (price per mt.)
ZA115 – Additional expelling quick cylinder
ZA116 – Idle roll collecting bench: mt. 1 long, mt. 1,5 deep (min. order: length mt. 3)

ZM065 – ELECTRONIC SELECTING DEVICE WITH QUICK CYLINDERS to be combined with the mod. TR/600-CT/600
Functional for unloading individual bars; not assured the functioning for the simultaneous unloading of multiple bars.
Not combinable with the automatic cutting-off machines Matrix1 or Matrix2 – left type.
Min. length of the piece to be unloaded by the mod. Matrix1 or Matrix2: 300 mm.
Min. length of the piece to be unloaded by the mod. Matrix3 or Matrix4: 100 mm.
Basic supply:
– Motorized carpet mt. 3
– Nr. 3 quick expelling cylinders
– Unloading carpet with variable speed (mt./min. 0-120)
– Carpet mm. 435 wide
– Adjustable position of expelling cylinders
– Coupling of size/corresponding unloading to be programmed on board machine
Accessories of the a.m. SELECTING DEVICE:
ZA123- Additional cost for oversize carpet length (price per mt.)
ZA124 – Additional expelling quick cylinder
ZA116 – Idle roll collecting bench: mt. 1 long, mt. 1,5 deep (min. order: length mt. 3)

CUTTING CAPACITY WITH SAW BLADE DIAMETER mm.350:
X=220 mm – Y=30 mm
X=200 mm – Y=50 mm
X=160 mm – Y=80 mm

CUTTING CAPACITY WITH SAW BLADE DIAMETER mm. 450:
X=330 mm – Y=25 mm
X=300 mm – Y=50 mm
X=250 mm – Y=95 mm

CUTTING CAPACITY WITH SAW BLADE DIAMETER mm. 500:
X=360 mm – Y=60 mm
X=325 mm – Y=100 mm
X=300 mm – Y=115 mm
X=250 mm – Y=135 mm

CUTTING CAPACITY WITH SAW BLADE DIAMETER mm. 600:
X=610 mm – Y=30 mm
X=590 mm – Y=60 mm
X=540 mm – Y=100 mm
X=510 mm – Y=120 mm
X=420 mm – Y=150 mm
X=380 mm – Y=160 mm

ROLL BENCH (Accessories):

PNEUMATIC WORKPIECE CLAMPING:

REAR VIEW OF THE EXTRACTION OUTLETS: