PNEUMATIC GUILLOTINE SHEARS mod. GH-8100-P with only stroke 160 mm.
In pneumatic guillotine shears, blade descent happens through a pneumatic cylinder.
Available in the version with only working stroke 160 mm. or in the version with 3 working strokes, 60-100-160 mm., selectable through a deviating device on the control panel according to the section of the profile to be cut, in order to allow the greatest working speed and the lowest air consumption as possible.
The GUILLOLTINE SHEARS GH 8100P is equipped with the automatic positioning device of stop supports near the cutting area in order to avoid breakings and to have an excellent positioning and clamping of the rod to be cut. It can be equipped with side positioning pressers and upper pressers, both operated by pedal and with adjustable pressure.
The GUILLOLTINE SHEARS GH 8100P can be also equipped with control splitting on the positioning handle of the cutting head, in order to increase working speed when more cuts must be done.
The GUILLOLTINE SHEARS GH 8100P is available with the following measuring systems:
* In inches
The longitudinal measurement scale is inserted in the striker sliding guides, the vertical scale for reading profile width is positioned in correspondence of 0 of the square.
* In inches
by means of diagrammed scale.
The measurement system must be defined at the order.
• Cutting capacity: width 100 mm. – height 160 mm.
• Cutting table height: 86 cm.
• Dimensions: 60x60x105 cm.
• Weight: 140 Kg.
• Working pressure: 6/8 bar
• Air consumption/Cutting stroke: stroke 60 mm., 7.9 Nl; stroke 100 mm., 10.5 Nl; stroke 160 mm., 22.1 Nl
• Noise level: < 65 dB