Description

AUTOMATIC MULTI-BLADE CIRCULAR SAW SCM GROUP mod. CLASS M3 HP.50 – As per E.C. rules

TECHNICAL DATA:
Max width of blade pack 300 mm
Carpet width 300 mm
Max blade diam. 350 mm
Min blade diam. 200 mm
Min piece length 390 mm
Blade-holder sleeve (blade hole) 70 mm
Key dimensions on blade-holder sleeve 20 x 5 mm
Blade rotation speed 4.200 r.p.m.
Adjustable carpet feeding speed in continuous 6-48 m/min
Worktable height from the ground 750 mm
Distance between base and the 1st right blade 200 mm
Worktable 1.530 x 950 mm
Suction mouth diam. for blades 200 mm
Suction mouth diam. for carpet 120 mm
Volume of sucked air at 25m/sec 3.850m3/h
Net weight 1850 kg
Feeding motor power at 50Hz 2 HP
Main motor power at 50 HP

STANDARD EQUIPMENT

• Base realized in cast iron enbloc
• Carpet with direct Tappeto con pattini in ghisa sferoidale a giunzione diretta
• Carpet sliding guides with low coefficient of friction, a orismatic one per a perfect straightness
• Automatic carpet lubrication
• Friction on the fedding variator for a total safety in case of accidental stop of the carpet
• Cast iron enbloc shaft-holder cylinder of great diameter. By a simple eccentric movement, the cylinder allows the use of blades with different diameters.
• Blade-holder shaft assembled on 4 bearing for the greatest stiffness.
• Pressure system that allows precise cuts, composed by n°2 steel rolls + wooden shoe presser before blades and n°2 steel rolls after blades.
• N° 2 blade position indicators for cut referfence
• Automatic blade star/delta starting
• Blade-holder sleeve with centering cone (E.C. version) equipped with rings of different thickness and flanges diam. 115 mm
• Max height to bwe worked 110 mm by blades diam. 350 mm
• Blade-holder sleeve with centering cone (electric protections/USA-CANADA) equipped with rings of different thickness and flanges diam. 95 mm.
• Max height to bwe worked 100 mm by blades diam. 300 mm
• Set of tools and keys for use and maintenance
• Conformity certificate as per E.C. rules (E.C. Version)
• N° 4 barriers of steel wedges with splinterproof and anti-return function for operators’safety
• Electric control board with general padlockable switch and magnetic starter with overload and undervoltage protection
• Low tension auxiliary circuit 110V
• Pulshbutton for front and back emergency stop
• Safety micro at the access door to blades with opening at the complete shaft stop
• Safety micro at the access door to motor (E.C.-USA/CANADA) with opening at the complete shaft stop
• Bobbin of minimum tension
• Carpet impulse feeding
• Amperometer for control of current absorption
• Automatic brake of feeding carpet (E.C. version)
• Electronic module of verification of still shaft (E.C.-USA/CANADA)
• Safety microswitch for the maximum width of the piece to be worked
• Safety microswitch for access to carpet maintenance (E.C./USA-Canada)
• Outlet protection tunnel
• Protection carter at feeding carpet, equipped with suction hose diam.120 mm.
• Signaling warning light of oil lack, for carpet lubrication
• Bar of anti-return breaker arms on the whole frontal part

OPTIONAL

11.10.11 Version Volt 220 or 230

18.11.04 Nr. 1 set of rings and flange 105 mm instead of 95 mm (electric protections/USA-Canada) for use blades diam. 350 mm, max height to be worked 120 mm

18.12.10 Additional sleeve with rings and flanges 95 mm (electric protections/USA-Canada) for use blades  diam. 300 mm, max height to be worked 100 mm

18.12.11 Additional sleeve with rings and flanges 105 mm (electric protections/USA-Canada) for use blades diam. 350 mm, max height to be worked 120 mm

18.13.05 Additional sleeve with rings and flanges 115 mm (E.C. version) for use blades diam 350 mm, max height to be worked 110 mm

24.02.31 Programmable guide with 6-stop revolver with pneumatic positioning by pedal. It allows the quick movement of the guide for different cutting programs

21.33.04 Laser for cutting line reference for the following typical uses:
– extraction of rough tables without using the guide
– selection of good parts on tables with knots or fissures using guide and single blade

08.36.36 Pallet

08.61.15 Seaworthy packing