Description

SPINDLE MOULDER SCM GROUP mod.CLASS TF130 E  – As per E.C. rules

TECHNICAL DATA
Worktable mm. 1200×730
Length of the E.C. shaft diam. 30-35 (40-50) mm. 140 (180)
Shaft base projection from the table mm. 52
Shaft base projection from the table with interchangeable shaft mm. 92
Max diam. of the tool reentering under the table with ring table (with “Fast”-sector table) mm. 300×85
Stroke of the spindle mouder guide with mechanical programming (positioning as to the shaft axis)  125 (from -125 to +125 with MK5 shaft)
External diam. of the suction mouth on the spindle moulder casing mm. 120
External diam. of the suction mouth on the base mm. 120
Speed of the air flow of the suction installation m/s 20
Air consumption of the suction installation mc/h 1700

STANDARD EQUIPMENT
Manual movement for lifting of the tool-holder shaft equipped with numerical visualizer for taking the work height.

57.02.21 Spindle moulder guide with mechanical programming – Spindle moulder guide with adjustment by handwheels from the machine front for:
* total translation of the guide as to tool diam.
* removal adjustment on the inlet table
– movements visualized by numerical numerators
– wooden tables and continuity table
– max tool diam. 250 mm

29.13.21 Manual adjustment ” Fast” sector table – In alternative to the rings for the optimization of piece support near the tool 

Shaft rotation speed 3000/4500/6000/7000/10000 r.p.m.
Electric prearrangement for feeding unit (E.C. version)
Electric visualizer of the inserted speed
Reversal of rotation of the spindle moulder shaft with electric interlock for starting
Manual star/delta starting (electric guards)
Automatic star/delta starting (E.C. version)
Motor power 7kW 50Hz (8kW 60Hz) 7kW 9,5HP 50Hz (8kW 11HP 60Hz)
Guards for works to the shaft (max tool diam. 160 mm) (E.C. version)
Emergency push-button
Safety micro-switches at shaft locking (E.C. versions)
Safety micro-switches at motor access door 
Padlockable main switch
Magnetotermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake on the main motor (E.C. and USA/Canada versions)
Mechanical motor brake on the main motor (Version with electric protections and USA/Canada ones)

OPTIONAL

57.02.60 Pendant control board – Easily accessible by the operator.

57.02.57 Feeding unit support device with manual vertical and horizontal movements – Vertical adjustment, as to the thickness of the workpiece, with visualization of the position on mechanical digital reader,  and horizontal adjustment as to tool diam. Using the column of the pendant control board, the device allows the total exclusion of the feeding unit from the worktable.
N.W.: The optional is available only combined with the pendant control board

57.02.22 “Flex” Spindle moulder guide with mechanical programming – Spindle moulder guide with adjustment by handwheels from the machine front for:
* total translation of the guide as to tool diam.
* removal adjustment on the inlet table
– movements visualized by numerical numerators
– wooden tables and continuity table
– “Flex” system for the exclusion the guide from the worktable 
– max tool diam. 250 mm

24.01.54 Aluminium tables instead of wooden equipped with continuity rules

93.01.00 Automatic star/delta starting (electric protections and USA/Canada)

57.00.64 Motor power 9kW 50Hz (11kW 60Hz) – With automatic star/delta starting: 9kW 12HP 50Hz (11kW 15HP 60Hz)

26.01.08 Interchangeable spindle moulder shaft with MK5 connection – The interchangeable spindle moulder shaft MK5 includes the prearrangement for the “T-SET” quick tool locking 
N.W.: The interchangeable spindle moulder shaft MK5 allows to buy the “T-SET” device like accessory after buying the machine 

13.02.09 Spare shaft (for the interchangeable spindle moulder shaft MK5)

57.02.10 Right tool-holder cone MK5, equipped with metal ring and pliers

57.02.11 Left tool-holder cone MK5, equipped with metal ring and pliers

57.02.92 “T-SET” quick tool locking – It allows locking and unlocking of tools simply using a compressed air gun.
N.W. – The option is available only combined with the interchangeable shaft with MK5 connection.
– “T-SET” can be joined to one diameter of shaft. If further optional “Spare interchangeable shafts MK” are selected with different diameters than the selected one while setting the machine, it’s required to order the same number of “T-SET” systems as the different diameters of the selected shafts

11.02.93 “LL” VERSION, table with 2 cast iron extensions to profile with:
– length mm 2500 equipped with bar for adjustable front support for pieces
– great emergency push-button 

11.02.05 Carriage on the fixed table for small tenoning equipped with orientable stop-holder guide on the table +/-60° with telescopic extension and piece-tightening arm. Max. tool diam. 250 mm with profiling guide)

57.00.00 “TL” Version for tenoning and profiling (E.C.) with manual feeding tenoning carriage 
– eccentric piece-tightening arm
– tilting telescopic guide with Nr. 4 positionable stops and datum memories 
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at inlet table equipped with front support bar
– tenon housing with suction hood:
* with quick tool replacement max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency push-button
– arm protection
– micro-switches for control and limitation at 3000/4500 r.p.m. in tenoning
N.W: – available only in E.C. configuration for programming piece length, adjustable for great pieces 
– available only combined with “Spindle moulder guide with mechanical programming or in alternative to “Flex” spindle moulder 
– obbligatoria potenza minima motore principale 7 kW

57.00.01 “TL” Version for tenoning and profiling (versions with electric protections and USA/Canada ones) with manual feeding tenoning carriage

– eccentric piece-tightening arm
– tilting telescopic guide with Nr. 4 positionable stops and datum memories 
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at inlet table equipped with front support bar
– tenon housing with suction hood
* max. tool diam. 350 mm
* USA/Canada version with quick tool replacement, max. tool diam. 300 mm)
– emergency push-button
N.W: – not available in E.C. configuration
– obligatory min. power of the main motor 7 kW

57.01.05 “TL” PRO-10 Version for tenoning and profiling with manual feeding tenoning carriage with sliding on ball blow-by guides THK that can be easily excluded from the worktabler
– +45° to -45° tilting telescopic guide as to feeding direction
– telescopic guide with Nr. 4 positionable stops and datum memories for programming piece length 
– worktable with side extensions (total length 2500mm) equipped with adjustable front support bar for great pieces
– eccentric piece-tightening arm
– Nr. 1 spill guard on guide with datum stop
– tenon housing with suction hood:
* with quick tool replacement max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency push-button
– arm protection
– micro-switches for control and limitation at 3000/4500 r.p.m. in tenoning (only for E.C. configurazion)
N.W: – available only joined with “Spindle moulder guide with mechanical programming or in alternative “Flex” spindle moulder guide
– obligatory the inverter or M-E or H-E versions for the TF 5

08.74.10 Seaworthy package (Base and “LL”)

08.97.03 Seaworthy package ( Base and”LL” with pendant control board)

08.74.03 Seaworthy package (“TL”)

08.74.04 Seaworthy package ( “TL” with pendant control board)