Description

SPINDLE MOULDER SCM GROUP Mod. CLASS TF130 – As per E.C. rules

TECHNICAL DATA
Working table mm. 1200×730
E.C. shaft length diam. 30-35 (40-50) mm. 140 (180)
Projection of the shaft base from the table mm. 52
Projection of the shaft base from the table with interchangeable shaft mm. 92
Max diam. of the tool re-entering under the table with ring table (with “Fast” sector table) mm. 320×85 (300×85)
Stroke of the spindle moulder guide with mechanical programming (positioning as to the shaft axis)  125 (from -125 to +125 with MK5 shaft)
External diam. of the suction hose on the spindle guard mm. 120
External diam. of the suction hose on the base mm. 120
Air flow speed of the suction installation m/s 20
Air consumption of the suction installation cu.m./h 1700

STANDARD EQUIPMENT
T-shaped excavation worktop complete with bezel (US/Canada version)
Manual deplacement for lifting the tool-holder shaft equipped with numerical visualizer for the measurement of the working height.
Electric display of the speed engaged (CE versions and with electric protectors)
Rotation reversal of the toupie shaft with electric interlock for starting
Recordable toupie guide with wooden tops complete with intake hood and continuity wooden top.
Max tool diameter 250 mm.
Electric prearrangement for the feeding unit (E.C. version)
Direct Engine Start (Electrical Protections and USA/Canada)
Automatic star-triangle engine starting (CE version machines)
Protection for works at the shaft (max. tool diam. 160 mm) (E.C. version)
Emergency pushbutton.
Safety micro-switches at shaft locking (E.C. versions)
Safety micro-switche at the door of the motor.
Padlockable main switch
Magneto-thermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake on the main motor (E.C. versions)
Mechanical motor brake on the main motor (Version with electric protections and U.S.A./Canada versions)
Certificate of conformity according to EC standards (EC Version)
Electrical components marked UL/CSA including cables (US/Canada version)

OPTIONAL

57.02.21 Spindle moulder guide with mechanical programming – Spindle moulder guide with adjustment through handwheels from the front of the machine, for:
– total translation of the guide as to tool diameter
– removal adjustment on the inlet table
– deplacement visualized by mechanical numerators
– wooden tables and continuity table
– max tool diam. 250 mm

29.13.21 Manual adjustment “Fast” sector table – In alternative to the rings for the optimization of the piece support near the tool

57.02.60 Pensive control panel – Easily accessible by the operator.

57.02.57 Drag support device with manual vertical movements and horizontal.
Vertical adjustment, in relation to the thickness of the workpiece, with position display on mechanical digital player, and adjustment horizontal in relation to the diameter of the tool.
The device using the hanging panel column allows the total excludability of the driver from the work surface.
N.W.: The optional is only available in combination with the hanging control panel.

57.02.12 “Flex” Spindle moulder guide with mechanical programming – Spindle moulder guide with adjustment through handwheels from the front of the machine, for:
– total translation of the guide as to tool diameter
– removal adjustment on the inlet table
– deplacement visualized by mechanical numerators
– wooden tables and continuity table
– “Flex” system for the exclusion of the guide from the worktable .
– max tool diam. 250 mm

24.01.54 Aluminium tables instead of the wooden ones for the guide with table continuity rules

26.01.08 Interchangeable shaft with MK5 connection – The MK5 interchangeable shaft includes the prearrangement for the quick tool locking “T-SET”
N.W.: The MK5 interchangeable shaft allows to buy the “T-SET” device like accessory after buying the machine 

13.02.09 Spare interchangeable shaft (for The MK5 interchangeable shaft)

57.02.10 Right MK5 tool cone-holder, equipped with metal ring and pliers

57.02.11 Left MK5 tool cone-holder, equipped with metal ring and pliers

57.02.92 “T-SET” quick tool locking – It allows locking and unlocking of tools only with the use of a compressed air gun.
N.W. – The option is available only combined with the interchangeable shaft with MK5 connection.
– “T-SET” can be associated to one diameter of shaft. If other optional “MK interchangeable spare shafts” with different diameters than the selected one when the machine was composed, it’s required to order a number of “T-SET” systems like the different diameters of the selected shafts.

57.01.41 Flat “LL” version with 2 cast iron extensions to profile complete with:
– total length mm 2500
– removable front extension for supporting large pieces
– emergency button

11.02.05 Carriage on the fixed table for small tenonings equipped with orientable stop-holder guide +/-60°with telescopic extension and piece-tightening arm. Max. diam. of the tool  250 mm (with profiling guide)

57.00.00 “TL” Version for tenoning and profiling (E.C.) with tenoning carriage with manual feeding
– eccentric piece-tightening arm
– telescopic tilting guide with nr. 4 positionable stops and reference memories
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at the inlet table with adjustable front support bar for great pieces
– housing for tenons with suction hose:
* with quick tool changement, max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency pushbutton
– arm guard
– micro-switches for control and limit at 3000/4500 r.p.m. while tenoning
N.W: – available only in E.C. configuration for programming the length of great pieces 
– available only combined with “Spindle moulder guide with mechanical programming or in alternative to the “Flex” spindle moulder guide
– obligatory the min. power of the main motor 7 kW

57.00.01 “TL” Version for tenoning and profiling (versions with electric protections and USA/Canada) with tenoning carriage with manual feeding
– eccentric piece-tightening arm
– telescopic tilting guide with nr. 4 positionable stops and reference memories
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at the inlet table with adjustable front support bar for great pieces
– housing for tenons with suction hose:
* max. tool diam. 350 mm
* USA/Canada versione with quick tool replacement, max. tool diam. 300 mm)
– emergency pushbutton
N.W.: not available in E.C. configuration
– obligatory the min. power of the main motor 7 kW

57.01.05 “TL” PRO-10 Version for tenoning and profiling with tenoning carriage with manual feeding with sliding on THK ball blow-by guides, that can be quickly excluded from the worktable
– telescopic tilting guide from +45° to -45° as to the feeding direction
– telescopic tilting guide with nr. 4 positionable stops and reference memories for the programming of piece length
– worktable with side extensions (total length 2500 mm) equipped with adjustable front support bar for pieces of great dimensions
– eccentric piece-tightening arm
– Nr. 1 spill guard on guide with datum stop
– housing for tenons with suction hose:
* with quick tool changement, max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency pushbutton
– arm guard
– micro-switches for control and limit at 3000/4500 r.p.m. while tenoning (only for E.C. configuration)
N.W: – available only combined with “Spindle moulder guide with mechanical programming or in alternative to the “Flex” spindle moulder guide
– obligatory the inverter or the versions M-E or H-E for the TF 5

93.01.00 Automatic star/delta starting (Electric and USA/Canada protections)

57.00.64 Motor power 9kW 50Hz (11kW 60Hz) – with automatic star/delta starting: 7kW 9,5HP 50Hz (8kW 11HP 60Hz)

53.03.20 Machine configuration for processing extra-wood materials
Configuration that makes the machine also suitable for processing cork, rigid rubber or plastic, plywood covered in plastic material.
Metals and wood-cement composites are excluded from the processes.

08.74.10 Seaworthy packing (Base and “LL”)

08.97.03 Seaworthy packing ( Base and “LL” with pendant control board)

08.74.03 Seaworthy packing (“TL”)

08.74.04 Seaworthy packing ( “TL” with pendant control board)