Description

SPINDLE MOULDER SCM GROUP mod.CLASS TI145 EP – As per E.C. rules

TECHNICAL DATA
Worktable mm. 1200×780
Tilting spindle moulder shaft -45/+45 degrees
Length of the E.C. shaft diam. 30-35 (40-50) mm. 160
Shaft base projection from the table with interchangeable shaft mm. 87 (7 kW) / 62 (9 kW)
Max diam. of the tool reentering under the table with ring table (with “Fast”-sector table) mm. 300×43
Stroke of the spindle moulder guide with mechanical programming (positioning as to the shaft axis) 125 (from -125 to +125)
Stroke of the FLEX ONE spindle moulder guide (positioning as to the shaft axis) 125 (from -125 to +125)
External diam. of the suction mouth on the spindle moulder casing mm. 120
External diam. of the suction mouth on the base mm. 100
Speed of the air flow of the suction installation m/s 20
Air consumption of the suction installation mc/h 1380

STANDARD EQUIPMENT
“Ready” electronic control – Electronic programmer, from 2 to 3 axis that can be selected through keyboard and visualization on digital monitor:
– management of shaft lifting and tilting
– possibility to store up to 300 work programs

57.02.21 Spindle moulder guide with mechanical programming – Spindle moulder guide with adjustment by hanwheels from the front of the machine:
* total translation of the guide as to tool diam. 
* removal adjustment on the inlet table
– movements seen by numerical numerators
– wooden tables and continuity table
– max tool diam. 250 mm

29.13.21 Manual adjustable “Fast” sector table – In alternative to the rings for the optimization of piece support near the tool 

26.01.08  Interchangeable spindle moulder shaft with MK5 connection – The interchangeable spindle moulder shaft MK5 includes the prearrangement for the “T-SET” quick tool locking
N.W.: The interchangeable spindle moulder shaft  MK5 allows to buy the “T-SET” device like accessory after buying the machine

Shaft rotation speed 3000/4500/6000/7000/10000 r.p.m.
Electric prearrangement for feeding unit (E.C. version)
Electric visualizer of the inserted speed
Reversal of rotation of the spindle moulder shaft with electric interlock for starting
Manual star/delta starting (electric guards)
Automatic star/delta starting (E.C. version)
Motor power 7kW 50Hz (8kW 60Hz) 7kW 9,5HP 50Hz (8kW 11HP 60Hz)
Guards for works to the shaft (max tool diam. 160 mm) (E.C. version)
Emergency push-button
Safety micro-switches at shaft locking (E.C. versions)
Safety micro-switches at motor access door 
Padlockable main switch
Magnetotermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake on the main motor (E.C. and USA/Canada versions)
Mechanical motor brake on the main motor (Version with electric protections and USA/Canada ones)

OPTIONAL

55.50.77 Preconfigurated version “READY 3” equipped with:
– spindle moulder guide “Flex One”
– motor power 9kW Hz50 (11kW Hz60) with automatic star/delta starting 9kW 12HP 50Hz (11kW 15HP 60HZ)
* automatic movement of the guide as to tool diam. 
* manual adjustment of the inlet table (asportazione) through handwheel equipped with mechanical numerical visualizer
* exclusion system of the worktable 
* aluminium tables with continuity rules
* max tool diam.250 mm 

55.50.78 Preconfigurated version “READY 3 UP”equipped with:
– pendant control board
– spindle moulder guide “Flex One”
– motor power 9kW Hz50 (11kW Hz60) with automatic star/delta starting 9kW 12HP 50Hz (11kW 15HP 60HZ)
* automatic movement of the guide as to tool diam. 
* manual adjustment of the inlet table (asportazione) through handwheel equipped with mechanical numerical visualizer
* exclusion system of the worktable 
* aluminium tables with continuity rules
* max tool diam.250 mm 

55.51.12 Preconfigurated version “EASY 2 UP” equipped with:
– pendant control board
– electronic control “EASY” colour LCD monitor 7” format 16:9 
* programming of the vertical position and tool tilting 
* functions of service to the operator with the possibility to manage 3 different points on the tool to fix the most timely “zero” machine
* tool database management
* 300 storable programs
– inverter the adjustment of the rotation speed from 900 to 10.000 r.p.m. managed by the CN
– motor power 9kW Hz50 (11kw Hz60) with automatic star/delta starting: 9kW 12HP 50Hz (11kW 15HP 60HZ)
N.W.: Obligatory to select the autotransformer for the tensions 220V,230V e 600V.

55.51.13 Preconfigurated version “EASY 3 UP” equipped with:
– pendant control board
– electronic control “EASY” colour LCD monitor 7” format 16:9 
* programming of the vertical position and tool tilting 
* programming of the guide position 
* functions of service to the operator with the possibility to manage 3 different points on the tool to fix the most timely “zero” machine
* tool database management
* 300 storable programs
– inverter the adjustment of the rotation speed from 900 to 10.000 r.p.m. managed by the CN
– spindle moulder guide “Flex One”
* automatic movement of the guide as to tool diam. through CN
* manual adjustment of the inlet table (removal) through handwheel equipped with mechanical numerical visualizer
* exclusion system of the worktable 
* aluminium tables with continuity rules
* max tool diam.250 mm 
– motor power 9kW Hz50 (11kw Hz60) with automatic star/delta starting: 9kW 12HP 50Hz (11kW 15HP 60HZ)
N.W.: Obligatory to select the autotransformer for the tensions 220V,230V e 600V.

57.02.60 Pendant control board – Easily accessible by the operator.

57.02.57 Feeding unit support device with manual vertival and horizontal movements – Vertical adjustment, as to the thickness of the workpiece, with visualization of the position on mechanical digital reader, and horizontal adjustment as to tool diam. The device – using the column of the pendant board – allows the total exclusion of the feeding unit from the worktable.
N.W.: The optional is available only combined with the pendant control board.

57.02.22 Spindle moulder guide “Flex” with mechanical programming – Spindle moulder guide with adjustment through handwheels from the front of the machine for:
* total translation of the guide as to tool diam.
* removal adjustment on the inlet table
– movements seen through mechanical numerators
– wooden tables and continuity table
– “Flex” system for the exclusion of the guide from the worktable
– max tool diam. 250 mm

24.01.54 Aluminium tables instead of wooden equipped with continuity rules

93.01.00 Automatic star/delta starting (electric protections and USA/Canada)

57.00.64 Motor power 9kW 50Hz (11kW 60Hz) with automatic star/delta starting: 9kW 12HP 50Hz (11kW 15HP 60HZ)

13.02.09 Spare shaft (for the interchangeable spindle moulder shaft MK5)

57.02.10 Right tool-holder cone MK5, equipped with metal ring and pliers

57.02.11 Left tool-holder cone MK5, equipped with metal ring and pliers

57.02.92 Quick tool locking “T-SET” – It allows locking and unlocking of tools simply using a compressed air gun
N.W. – The option is available only combined with the interchangeable shaft with connection MK5.

– “T-SET” can be joined with one shaft diameter. If you select other optional “spare interchangeable MK shafts” with different diameters than the selected one in setting the machine, it’s required to order as many  “T-SET” systems as the different diameters of the selected shafts

11.02.93 “LL” VERSION – table with 2 cast iron extensions to profile with:
– length mm 2500 with bar for adjustable front support for pieces
– great emergency push-button

11.02.05 Carriage on the fixed table for small tenoning equipped with orientable stop-holder guide on the table +/-60° with telescopic extension and piece-tightening arm. Max. tool diam. 250 mm with profiling guide)

57.00.00 “TL” Version for tenoning and profiling (E.C.) with manual feeding tenoning carriage 
– eccentric piece-tightening arm
– tilting telescopic guide with Nr. 4 positionable stops and datum memories 
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at inlet table equipped with front support bar
– tenon housing with suction hood:
* with quick tool replacement max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency push-button
– arm protection
– micro-switches for control and limitation at 3000/4500 r.p.m. in tenoning
N.W: – available only in E.C. configuration for programming piece length, adjustable for great pieces 
– available only combined with “Spindle moulder guide with mechanical programming or in alternative to “Flex” spindle moulder 
– obligatory the min. power of the main motor 7 kW

57.00.01 “TL” Version for tenoning and profiling (versions with electric protections and USA/Canada ones) with manual feeding tenoning carriage

– eccentric piece-tightening arm
– tilting telescopic guide with Nr. 4 positionable stops and datum memories 
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at inlet table equipped with front support bar
– tenon housing with suction hood
* max. tool diam. 350 mm
* USA/Canada version with quick tool replacement, max. tool diam. 300 mm)
– emergency push-button
N.W: – not available in E.C. configuration
– obligatory min. power of the main motor 7 kW

08.97.10 Seaworthy package (Base and “LL” with automatic guide)

08.97.03 Seaworthy package (Base e “LL” with pendant control board)

08.97.20 Seaworthy package (“TL” with automatic guide)

08.74.04 Seaworthy package (“TL” with pendant control board)