Description

SPINDLE MOULDER SCM GROUP mod. L’INVINCIBILE TF5 – As per E.C. rules

TECHNICAL DATA
Worktable mm. 1200×730
Quick tool replacement [HSK B 63 H-E version]
Working length of the E.C. shaft diam. 30-35 (40-50) mm. 140 (160) [140 (140) H-E version]
Extension of the shaft base from the table mm. 52 [92 M-E version]
Max diam of the tool reentering under the table mm. 300×85
Stroke of the “Flex” spindle moulder guide (positioning as to shaft axis) mm. 250 (from -125 to +125)
Ext. diam. of the suction mouth on the spindle moulder casing mm. 120
Ext. diam. of the suction mouth on the base (specific for forced air cooling of the electro-chuck 7,5 kW) 1×120 + (1×100) opt.
Speed of air flow of the suction unit m/s 20
Consumption of the air of the suction unit mc/h 1700 [2200 11 kW]

STANDARD EQUIPMENT
Pendant control board – Easily accessible by the operator.
Electronic control “Easy Touch 7” equipped with: 
– LCD 7” colour screen with touch screen system on pendant control board
– Management of the 6-8 work axis in manual, half-automatic, automatic modality
– Possibility to store up to 1000 programs with their image, name and identifying number 
– Possibility to store up to 500 different tools with their image, name and identifying number
Function of assistance to the operator on electronic control, equipped with: 
– management of the coordinates relative to 3 different points on the tool in order to determine an origin (new zero machine) on a point of the desired tool 
– management of tool rim speed 
– assistance to the operator for the most recurring workings 
“Flex” spindle moulder guide with automatic deplacement managed by electronic control, programming of the whole guide as to tool diam. and the inlet table according the desired removal. “FLEX” system for exclusion of theguide from the worktable 
Aluminium tables for profiling guide with continuity rules.
“Fast” sector table, manual adjustment  In alternative to the rings for the optimization of the support of pieces near the tool 
Electric preset for feeding unit 
Reversal of rotation direction of tool-holder shaft 
Automatic motor starting
Shaft rotation speed 3000/4500/6000/7000/10000 r.p.m.
Motor power 7kW 50Hz (8kW 60Hz) 7kW 9,5HP 50Hz (8kW 11HP 60Hz)
Guard for works at the shaft,  max. tool diam. 160 mm.
Automatic motor brake on the main motor (E.C. version)
Mechanical motor brake on the main motor (versions with electric protections and USA/Canada)
Safety sensors in the phases of tool replacement, control of stop of chuck rotation, control of locking/unlocking of tool-holder cone 
N.W. Standard for H-E version
Shaft locking by electropneumatic system N.W. Foreseen in M-E version
Safety micro-switches at shaft locking (E.C. version)
Safety micro-switch at the access door to motor
Emergency puch-button
Padlockable main switch
Magnetothermic protection.
Transformer for auxiliary circuit 110V.
Conformity certificate as per E.C. rules

OPTIONAL

55.50.80 “EASY TOP” version equipped with: 
– electrochuck with max power available 3.400 r.p.m. 
– electrochuck power 7,5kW 10HP 
– quick tool replacement HSK B 63 
– system of air flow to keep clean connection surfaces
– nr. 1 tool-holder shaft with HSK B 63 connection 
– inverter for the electronic control of tool rotation speeds from 900-12.000 r.p.m. 
– “Fast” sector table with automatic deplacement 
– support device of the feeding unit with automatic deplacements

57.03.19 “Easy Touch 12” electronic control equipped with: 
– Colour LCD 12” screen with “touch screen” system on pendant control board
– Management of the 6-8 work axis in manual, half-automatic, automatic modality 
– Possibility to store up to 1000 programs with their image, name and identifying number 
– Possibility to store up to 500 different tools with their image, name and identifying number
N.W.: Available only combined to the Versions “EASY TOP”

57.01.59 “Fast” sector table with automatic deplacement managed by “Easy” control – Additional module for Easy electronic control for programming the “Fast” sector table N.W. The optional item is only available combined with the “Flex” spindle moulder guide with automatic deplacement.

57.02.57 Support device of the feeding unit with manual vertical and horizontal deplacements
Vertical adjustment, according to the thickness of the piece to be worked, with visualization of the position on mechanical digital reader, and horizontal adjustment according to tool diam. The device – using the column of the pendant board – allows the total excludibility of the feeding unit from the worktable.
N.W.: The optional item is available only coupled with the pendant control board.

57.02.59 Support device of the feeding unit with automatic deplacements managed by electronic control  
Vertical adjustment, according to the thickness of the piece to be worked, with visualization of the position on electronic digital reader, and horizontal adjustment according to tool diam. Automatic pneumatic locking system. The device – using the column of the pendant board – allows the total excludibility of the feeding unit from the worktable.
N.W.: – Pneumatic working pressure 6 bar. 
– The optional item is available only coupled with “Flex” spindle moulder guide with automatic deplacement.

57.02.08 Motor power 9kW 50Hz – with automatic star/delta starting: 9kW 12HP 50Hz (11kW 15HP 60Hz)

57.02.20 M-E version equipped with 
– electro-chuck with max available power from 3.400 r.p.m. 
– electro-chuck power 7,5kW 10HP 
–  interchangeable shaft MK5 
– inverter for the electronic control of the tool rotation speed from 900 to 12.000 r.p.m.
N.W. Pneumatic working pressure 6 bar

13.02.09 Spare shaft (for interchangeable MK5)

57.02.10 Tool-holder cone MK5, equipped with ring nut and pliers, right 

57.02.11 Tool-holder cone MK5, equipped with ring nut and pliers, left

57.02.88 “T-SET” Quick tool locking – It allows locking and unlocking of tools simply using a compressed air gun.
N.W.: – Not available coupled with the H-E version 
– “T-SET” can be combined with one diameter of shaft. If other optional “Spare interchangeable MK shafts” are selected with different diameters than the selected one while composing the machine, it’s required to orden the same number of “T-SET” systems as the different diameters of the selected shafts

57.02.17 H-E version equipped with 
– electro-chuck with max available power from 3.400 r.p.m. 
– electro-chuck power 7,5kW 10HP  
– quick tool replacement HSK B 63
– system of air flow to keep clean the connection surfaces 
– n° 1 tool-holder shaft with connection HSK B 63
– inverter for the electronic control of the tool rotation speed from 900 to 12.000 r.p.m.
N.W. Pneumatic working pressure 6 bar

57.02.32 N° 4 tool-holder shafts with HSK B 63 connections equipped with rack with n° 5 seats for tool-holder shafts 

57.02.14 N°1 Tool-holder shaft with HSK B 63 connection (additional)

53.02.12 Tool-holder cone HSK B 63, equipped with ring nut without pliers, right 

53.02.13 Tool-holder cone HSK B 63, equipped with ring nut without pliers, left

21.18.27 Removable tool-holder store equipped with 2 racks and multi-purpose bracket 
N.W. Available only for H-E version

57.02.58 

Electro-chuck power 11kW 15HP 
N.W. Available only combined with the M-E version or in alternative to the H-E version

57.02.89 SAV€NERGY Intelligent management system of energetic consumptions of the machine for elimination of waste, composed by the following functionalities:. 
– optimization of suction system  
– automatic stand-by
– intelligent management of electro-chuck cooling  
– optimization of compressed air with automatic sectioning of pneumatic feeding  
N.W. Available only combined with  the M-E version or in alternative to the H-E version

11.02.93 

“LL” VERSION – table with 2 cast iron profiling extensions with: 
– length mm 2500 equipped with bar for adjustable front support for great pieces 
– emergency pushbutton

11.02.05 Carriage on the fixed table for small tenoning equipped with orientable stop-holder guide on the table +/-60° with telescopic extension and piece-tightening arm. Max. tool diam. 250 mm (with profiling guide).

57.01.05 “TL” PRO-10 version for tenoning and profiling with tenoning carriage with manual feeding with sliding on THK blow-by guides, quickly excludable from the worktable 
– tilting telescopica guide from +45° to -45° as to feeding direction 
– telescopic guide with nr. 4 positionable stops and reference memories for programming of piece length 
– worktable with side extensions (total length 2500mm) equipped with adjustable front support bar for great pieces 
– eccentric piece-tightening arm 
– Nr. 1 spling guard on guide with reference stop
– casing for tenons with suction hood: 
* with quick tool replacement max tool diam. 300 mm 
* with shaft from 30 to 35 mm max tool diam. 300 mm 
* with shaft from 40 to 50 mm max tool diam. 350 mm 
– emergency pushbutton 
– arm guard protection 
– micro-switches for control and limitation to 3000/4500 r.p.m. while tenoning (only for E.C. configuration) 
N.W: – available only combined with spindle moulder guide with mechanical programming or in alternative “Flex” spindle moulder guide – obligatory the inverter or M-E versions or H-E for the TF 5

53.02.21 Autotransformer for tensions 220V, 230V, 600V

08.97.03 Seaworthy packing (Base and “LL” with pendant control board)

08.97.05 Seaworthy packing (Base and “LL” with pendant control board and Inverter)

08.74.04 Seaworthy packing (“TL” with pendant control board)