Description

SPINDLE MOULDER SCM GROUP mod.NOVA TF110 – As per E.C. rules

TECHNICAL DATA
Working table (with wagon as optional) mm. 1200×730
E.C. shaft length diam. 30-35 (40-50) mm. 140 (180)
Projection of the shaft base from the table mm. 5
Projection of the shaft base from the table with interchangeable shaft mm. 33
Max diam. of the tool re-entering under the table (45°) mm. 320×85
External diam. of the suction hose on the spindle guard mm. 120
External diam. of the suction hose on the base mm. 120

STANDARD EQUIPMENT
Manual deplacement for lifting the tool-holder shaft equipped with numerical visualizer for the measurement of the working height.
Fixed spndle moulder guide with wooden tables (version with electric protections) equipped with suction hose (max tool diam. 310 mm for TF110 and 240mm for TF100-TI105).
Adjustable spindle moulder guide with wooden tables (E.C. and Usa/Canada versions) – equipped with suction hose and continuity wooden table (max tool diam. 250mm for TF110 and 240mm for TF100-TI105).
Shaft rotation speed 3000/4500/6000/7000/10000 r.p.m. at 50Hz
Electric prearrangement for the feeding unit (E.C. version)
Electric visualizer of the inserted speed.
Motor power 5kW 50Hz (6kW 60Hz) with direct starting 5kW 7HP 50Hz (6kW 8HP 60HZ)
Reversal of rotation of the spindle moulder shaft with electric interlock for starting.
Protection for works at the shaft (max. tool diam. 160 mm) (E.C. version)
Emergency pushbutton.
Safety micro-switches at shaft locking (E.C. and USA/Canada versions)
Safety micro-switche at the door of the motor.
Padlockable main switch
Magneto-thermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake on the main motor (E.C. and Usa/Canada versions)
Mechanical motor brake on the main motor (Version with electric protections)

OPTIONAL

55.50.59 “TL” preconfigurated version with tenoning (E.C.) – Equipped with:
– eccentric piece-tightening arm
– telescopic tilting guide with nr.4 positionable stops and reference memories for the programming of piece length
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at the inlet table with adjustable front support bare for great pieces
– housing for tenons with suction hose: * with shaft from 30 to 35 mm max tool diam. 300 mm / * with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency pushbutton
– arm guard
– micro-switches for control and limit at 3000/4500 r.p.m. while tenoning
– motor power with automatic star/delta starting 7kW – 9,5HP 50Hz (8kW 11HP 60Hz)

55.50.60 “TL” version with tenoning carriage (electric protections and USA/Canada versions) – equipped with:
– eccentric piece-tightening arm
– telescopic tilting guide with nr.4 positionable stops and reference memories for the programming of piece length
– Nr. 1 spill guard on guide with datum stop
– Nr. 1 extension at the inlet table with adjustable front support bare for great pieces
– housing for tenons with suction hose: * with shaft from 30 to 35 mm max tool diam. 300 mm / * with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency pushbutton
– motor power with automatic star/delta starting 7kW 9,5HP 50Hz (8kW 11HP 60Hz)

57.00.74 Adjustable spindle moulder guide with wooden tables (Version with electric protections) equipped with suction hose and continuity wooden table (max tool diam. 250mm for TF110 and 240mm for TF100-TI105)

57.00.76 Spindle moulder guide with mechanical programming (E.C. and Usa/Canada versions) – Spindle moulder guide with linear adjustment in continuous through crank from the front of the machine for:
– total translation of the guide as to tool diameter
– removal adjustment on the inlet table
– deplacement visualized by mechanical numerators
– wooden tables and continuity table

57.01.94 Spindle moulder guide with mechanical programming (Version with electric protections) – Spindle moulder guide with linear adjustment in continuous through crank from the front of the machine for:
– total translation of the guide as to tool diameter
– removal adjustment on the inlet table
– deplacement visualized by mechanical numerators
– wooden tables and continuity table

57.01.45 Aluminium tables instead of the wooden ones for the guide with table continuity rules
N.W: not available with the fixed spindle moulder guide.

57.01.41 “LL” version – table with 2 extensions to profile equipped with:
– length mm 2500 equipped with bar for adjustable front support for great pieces
– extractable frontal extension
– Emergency pushbutton

57.01.44 Carriage on the fixed table for small tenonings equipped with orientable stop-holder guide +/-60°with telescopic extension and piece-tightening arm.
Max. diam. of the tool to mount 250 mm on TF110 and 240 mm on TF100 – TI105, with the standard profiling guide.
N.W.: on the machines TF100 and TI105 max. height to work=70mm, when there is the interchangeable shaft 60mm.

57.01.48 Interchangeable shaft

57.01.47 Spare interchangeable shaft – N.W. Only available with the code 57.01.48

57.01.95 Shaft rotation speed 1300/3000/4500/6000/9000 r.p.m.

57.01.56 Motor power 7kW 50Hz (8kW 60Hz) with automatic star/delta starting: 7kW 9,5HP 50Hz (8kW 11HP 60Hz)

08.68.72 “triple wall” packing for base and “LL” versions

08.68.73 Seaworthy packing for “TL” versions