Description

TILTING SPINDLE MOULDER SCM GROUP mod. L’INVINCIBILE TI7 – As per E.C. rules

TECHNICAL DATA
worktable mm. 1200×750
tilting spindle moulder shaft -45,50/+45,50 degrees
quick tool replacement HSK B 63
working length of the E.C. shaft diam. 30-35 (40-50) mm. 140 (140)
shaft base projection from the table mm. 54
max diam of the tool reentering under the table mm. 300×75
stroke of the “Flex” spindle moulder guide (positioning as to the shaft axis) mm. 250 (da -125 a +125)
external diam. of the suction mouth on the spindle moulder case mm. 120
external diam. of the suction mouth on the base (specific for the forced air cooling of the electro-chuck 7,5 kW) mm. 1×150 + (1×100)
air flow speed of the suction unit m/s 20
Air consumption of the suction installation mc/h 2600 [2100 11kW]

STANDARD EQUIPMENT
Pendant control board, easily reachable by the operator.
57.03.19 Electronic control “Easy Touch 12” equipped with:
– Colour LCD 12” screen with touch screen system on pendant control board  
– Management of the 6-8 work axis in manual, half-automatic, automatic modalities
– Possibility to store up to 1000 programs with their image, name and identifying number 
– Possibility to store up to 500 different tools with their image, name and identifying number 
N.W.: Available only in combination with the “EASY TOP” versions
Function of assistance at the operator on electronic control equipped with:
– management of the coordinates referring to 3 different points on the tool in order to determine an origin (new zero machine) on a desired point of the tool 
– management of the peripheral speed of the tool
– assistance to the operator for the most recurring workings
System of the automatic recognition of tool. Equipped with portable electro-magnetic reader for the identification of the tool installed on the machine. As regards to the recognized tool, the “Easy Touch” control will start up:
– to show the saved programs as to the recognized tool  
– to recognize the max. speed as to the recognized tool
– to recognize the max strokes of each axis to avoid possible collisions 
– to indicate a system of coordinates as to the recognized tool since it can determine an origin (new zero machine), on 3 different points of the tool profile selected by the  operator
“Flex” spindle moulder guide with automatic deplacement managed by electronic control – programmaing of the whole guide as to the tool diam. and of the inlet table as to the desired removal. “FLEX” system for the exclusion of the guide from the worktable
Aluminium tables for profiling guide equipped with continuity rules.
57.01.59 9 “Fast” sector table with automatic motion managed by the “Easy” control.  Additional module for the electronic control Easy for programming of the “Fast” sector table N.W. The optional item is available only combined with the “Flex” spindle moulder guide with automatic motion.
Electric preset for feeding device.
Reversal of rotation of the tool-holder shaft.
Automatic motor starting.
H-E version equipped with:
– Electro-chuck with max available power from 3.400 r.p.m. 
– electro-chuck power 7,5kW 10HP
– quick tool replacement HSK B 63
– system of air flow to keep clean the connection surfaces 
– n° 1 tool-holder shaft with HSK B 63 connection equipped with the electronic device (transponder) required to be identified by the electronic control 
– inverter for the electronic controll of the rotation speed of the tool from 900 to 12.000 r.p.m. 
N.W.: Pneumatic working pressure 6 bar
Exclusive system of electro-chuck motion, equipped with 
– Vertical motion of all shaft group on double linear precision guides through pre-loaded ball blow-by slides 
– Tilting from -45,50° to +45,50° with circle-arc, dovetail guide on cast iron casting and motion by transmission through ball blow-by screw (patented system).
Protection for works at the shaft , max. tool diam. 160 mm.
Electronic brake with stop assured even without network voltage.
Safety sensors in the phases of tool replacement, control of the stop of chuck rotation, control of locking/unlocking of tool-holder cone
N.W. Standard for H-E version
Safety micro-switch at the access door at the motor.
Emergency push-button.
Padlockable general switch.
Magnetothermic protection.
Transformrfor auxiliary circuit 110V.
Conformity certificate as per E.C. rules.

OPTIONAL

57.02.57 Device of feeding device support with manual vertical and horizontal deplacement
Vertical adjustment, according to the thickness of the piece to be worked, with visualization of the position on mechanical digital reader, and horizontal adjustment as to tool diam. The device, using the column of the pendant board, allows the total excludibility of the feeding device from the worktable.
N.W.: The optional item is available only combined with the pendant control board.

57.02.59 Device of feeding device support with automatic deplacements managed by electronic control 
Vertical adjustment, according to the thickness of the piece to be worked, with visualization of the position on electronic digital reader, and horizontal adjustment as to tool diam. System of automatic pneumatic locking. The device, using the column of the pendant board, allows the total excludibility of the feeding device from the worktable. 
N.W.: – Pneumatic  working pressure 6 bar.
– The optional item is available only combined with the “Flex” spindle moulder with automatic motion.

53.02.08 N° 4 tool-holder shafts with HSK B 63 connection equipped with rack with n° 5 seats for tool-holder shafts 
Each shaft is equipped with the electronic device (transponder) required to be recognized by the electronic control.

53.00.13 N° 1 tool-holder shaft with HSK B 63 connection (additional) The shaft is equipped with the electronic device (transponder) required to be recognized by the electronic control.

53.02.12 Tool-holder cone HSK B 63, equipped with ring nut without pliers, righ

53.02.13 Tool-holder cone HSK B 63, equipped with ring nut without pliers, left

21.18.27 Movable tool-holder store equipped with 2 racks and multi-purpose bracket 

N.W. Available only for H-E version

57.02.58 Power of the electro-chuck 11kW 15HP
N.W. Available only combined with the M-E version or in alternative to the H-E version

57.02.89 SAV€NERGY System of intelligent management of energetic consumptions of the machine for the elimination of waste, composed by the following  degli sprechi, composto dalle seguenti functionalities:.
– optimization of the suction system 
– automatic stand-by  
– intelligent management of cooling of the electro-chuck 
– optimization of the compressed air with automatic sectionig of the pneumatic feeding 
N.W. Available only combined with the M-E version or in alternative to the H-E version

11.02.93 “LL” version, table with 2 cast iron profiling extensions with:
– length mm 2500 equipped with adjustable bar for front support for great piece 
– emergency push-button

11.02.05 Carriage on gthe fixed table for small tenonings equipped with stop-holder guide on the table +/-60° with telescopic extension and piece tightening arm.  Max tool diam. 250 mm (with profiling guide).

57.01.05 “TL” PRO-10 version for tenoning and profiling with manual feeding tenoning carriage sliding on THK ball blow-by guides, quickly excludable from the worktable
– tilting telescopic guide from +45° to -45° as to feeding direction 
– telescopic guide with Nr. 4 positionable stops and reference memories for the programming of piece length
– worktable with side extensions (total length 2500mm) equipped with adjustable front support bar for great pieces 
– eccentric piece tightening arm 
– Nr.1 splint guard on guide with datum stop 
– casing for tenons with suction hood:
* with quick tool replacement max tool diam. 300 mm
* with shaft from 30 to 35 mm max tool diam. 300 mm
* with shaft from 40 to 50 mm max tool diam. 350 mm
– emergency push-button 
– arm guard 
– micro-switches for the control and the limitation at 3000/4500 r.p.m. in tenoning (only for E.C. configuration)
N.W: – available only combined with Spindle moulder guide with mechanical programming or in alternative to the “Flex” spindle moulder guide – obligatory the inverter or the M-E or H-E versionsfor the TF 5

53.02.21 Autotransformer for tensions 220V, 230V, 600V

08.97.05 Seaworthy packing (Basic and “LL” with Pendant control board and Inverter)

08.74.04 Seaworthy packing (“TL” with Pendant control board)