Description

SURFACE PLANING MACHINE SCM GROUP mod.CLASS F520 – As per E.C. rules

TECHNICAL DATA
– Working width mm. 520
– Table total length mm. 2750
– Inlet table length mm. 1550
– Outlet table length mm. 1200
– Shaft diam. mm. 120
– Shaft rotation speed 5000 r.p.m.
– Nr. 4 knives mm. 35x3x520
– Aluminium surface guide mm. 1200×190
– Tilting surface guide from 90° to -45°
– Height of tables from the ground mm. 845
– Suction mouth diam. mm. 120
– Max. removal mm. 8

STANDARD EQUIPMENT
Upper position of the control board
Manual movement of the inlet table 
Removal readout by index on plate
Shaft and knife-stop gibs with markingd for shaft position – Equipped with knife adjustment device
Set of service keys
Motor 5kW 50Hz (6kW 60Hz) with direct starting kW 5 HP 7 Hz50 (kW 6 HP 8 Hz60)
Bridge protection at the surface shaft under the worktable (E.C. version)
It’s prevented the working of stop on the shaft (E.C. version)
Padlockable main switch
Magnetotermic protection
Trasformer for auxiliary circuit 110V
Automatic motor brake (E.C. and USA/Canada versions)
Emergency pushbutton

OPTIONAL

55.50.00 E.C. P1 and Electric protection version equipped with:
– motor power kW 7 Hz50 with automatic star/delta starting
– kW7 HP9,5 Hz50 (kW8 HP11 Hz60)

34.02.11 Enbloc shaft with ‘TERSA’ throwaway knives equipped with 1 set of knives

57.03.23 “Xylent” – spiral planer shaft with 3 sets of cutting edges equipped with:
                 – nr. 66 knives 15x15x2,5mm with 4 cutting edges with self-locking and self-centering screws 
                 – nr. 1 dynamometric key for the safe and correct locking 
                 – nr. 2 inserts for the dynamometric key 

57.03.27 Xylent maintenance Kit – Case equipped with:
                 – 1 bottle of degreasing/detergent liquid for cleaning resins 
                 – 1 dynamometric key set at 5,7 Nm
                 – 2 bit Torx T20
                 – 10 inserts 15x15x2,5
                 – 5 screws M6x15 T20
                 – 1 brush with brass bristles to clean the shaft with assembled inserts 
                 – 1 brush with steel bristles to clean insert seats

57.03.28 Kit of 10 spare inserts (15x15x2,5) for Xylent shaft

24.06.17 Additional turnable guide for thin piece working

57.00.22 “Smart Lifter” for surface shaft protection – It allows the motion of the protection only during the passage of wood, leaving the knife-holder shaft always covered.

08.74.05 Seaworthy packing