Description

THICKNESS PLANING MACHINE SCM GROUP mod.CLASS S520 – As per E.C. rules

TECHNICAL DATA
Working width mm. 520
Working table mm. 530×900
Min/max working height mm. 3,5/300
Max removal mm. 8
Min length to be worked mm. 220
Min width to be worked mm. 10
Shaft rotation speed 4500 r.p.m.
Shaft diam. mm. 120
Nr. 4 knives mm. 35x3x520
Feeding speed 4-20 
Suction hose diam. mm. 150

STANDARD EQUIPMENT
Table 2-speed motorized lifting with micrometric feeding
Numerical reader of the working height with height decimal control 
Variable feeding speed through from 4 to 20 m/min
Vertical sliding working table through 4 steel screws
1st steel inlet draft roll with helical scoring
2 (two) outlet upper rubber-coverred draft rolls 
Interchangeability of draft rolls
Motor power 7kW 50Hz (8kW 60Hz) 7kW 9,5 HP 50Hz (8kW 11HP 60Hz)
Manual star/delta motor starting (E.C. versions and with electric protections)
N.W. The machine must be connected electrically even to neutral 
Piece inlet and outlet straps
Emergency pushbutton on the backside of the machine (E.C. version)
Micro safety switch at the casing (E.C. version)
Padlockable main switch
Magneto-thermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake (E.C. version)

OPTIONAL

53.03.07 Pneumatic adjustment on the upper draft rolls 

32.03.07 Worktable with nr. 2 idle rolls – N.W. Recommended solution for workings of heavy carpentry where moist or resinous woods are processed 

57.00.04 1st rubber-covered upper draft roll in alternative to the standard fluted roll 

32.01.50 1st steel inlet sectioned draft roll in alternative to the standard fluted roll 

57.02.41 Outlet steel draft roll/s instead of the rubber-covered steel one/s
                 N.W.: – The optional is recommended only for workings where there aren’t special finishing needs (f.e., heavy carpentry, packings, stocks for drawing rooms).
                 – It’s recommended the combination with the option “thickness table with nr. 2 idle rolls”

34.02.12 Enbloc shaft with throwaway knives ‘TERSA’ equipped with 1 set of knives
                 N.W. It’s recommended the uprated power on the main motor if there are great removals

57.03.23 “Xylent” spiral planer shaft with 3 series of cutting edges equipped with:
                 – n° 84 knives 15x15x2,5mm /4 cutting edges with self-locking and self-centering screws 
                 – nr. 1 Dynamo-metric key for correct and safe locking
                 – nr. 2 inserts for the dynamo-metric key 

57.03.27 Xylent maintenance kit – Case equipped with
                 – 1 bottle of detergent/degreasing liquid for cleaning resins 
                 – 1 Dynamo-metric key calibrated at 5,7 Nm
                 – 2 bit Torx T20
                 – 10 inserts 15x15x2,5
                 – 5 screws M6x15 T20
                 – 1 brush with brass bristles to clean the shaft with assembled inserts 
                 – 1 brush with steel bristles to clean the insert seats

57.03.28 Kit of 10 spare inserts (15x15x2,5) for Xylent shaft

57.02.50 Extension at outlet table (dimensions 630 x 1200mm) – Equipped with automatic pneumatic locking

97.04.68 Motor power 9kW 50Hz (11kW 60Hz) with automatic star/delta starting 9kW 12HP 50Hz (11kW 15HP 60Hz)

08.74.06 Seaworthy packing

08.06.66 Seaworthy packing + extension at the table