Description

THICKNESS PLANING MACHINE SCM GROUP mod. L’INVINCIBILE S7 – As per E.C. rules

TECHNICAL DATA
working width mm. 630
worktable mm. 640×1000
min/max working height mm. 3,5/300
max removal mm. 8
min length to be worked mm. 260
min width to be worked mm. 10
shaft rotation speed 4500 r.p.m.
planer shaft diam. mm. 120
Nr. 4 knives mm. 35x3x640
electronically adjustable feeding speed 4÷20
feeding motor kW 1,3 
suction mouth diam. mm. 150

STANDARD EQUIPMENT
Electronic control “READY”. Equipped with:
– management of the positioning of the thickness table 
– management of the feeding speed
– modalities: manual, half-automatic and automatic with 99 storable programs
– additional functions: calculator and hour-meter
Electronically adjustable feeding speed through inverter from 4 to 20 m/min
Accomodation of the feeding speed according to the max absorption of energy of the main motor
Thickness table with vertical sliding through 4 steel screws
1st upper inlet feeding steel roll 
2 upper outlet upper feeding rubber-covered rolls
Interchangeability of feeding rolls 
Differentiated pneumatic adjustment of pressure on the upper feeding rolls 
Motor 9kW 50Hz (11kW 60Hz) – Equipped with automatic star/delta starting: kW9 HP12 Hz50 (kW11 HP15 Hz60)
N.W. The machine must be connected electrically even to neutral
Inlet and outlet bus bar 
Safety micro-switch at casing
Emergency push-button on the back and front side of the machine
Padlockable general switch
Magnetothermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake (E.C. version)
Conformity certificate as per E.C. rules

OPTIONAL

53.03.09 1st inlet upper feeding rubber-covered roll in alternative to the steel roll 

53.03.10 1st inlet upper steel sectionized roll for working of pieces with different thickness

53.03.11 1st inlet upper rubber bi-composed roll for working of pieces with different thickness

53.03.13 Thickness table with nr. 2 idle rolls
N.W. Solution recommended for workings of heavy carpentry where moist or resinous woods are worked 

57.03.14 Enbloc shaft with “TERSA” throwaway knives Equipped with a set of knives

57.03.24 “Xylent” spiral 3-keen planer shaft equipped with:
                 – n° 84 4-keen knives 15x15x2,5mm with self-locking and self-centering screws 
                 – n° 1 dynamometric key for safe and sure keen locking 
                 – n° 2 inserts for the dynamometric key

57.03.27 Maintenance kit Xylent – Case equipped with:
                 – 1 bottle of cleaning/degreasing liquid for cleaning resins
                 – 1 dynamometric key calibrated at 5,7 Nm
                 – 2 bit Torx T20
                 – 10 inserts 15x15x2,5
                 – 5 screws M6x15 T20
                 – 1 brush with brass bristles to clean the shaft with inserts
                 – 1 brush with steel bristles to clean insert seats

57.03.28 Kit of 10 spare inserts (15x15x2,5) for Xylent shaft

53.02.28 Extension to outlet table (dimensions 630 x 1200mm) Equipped with pneumatic automatic locking

08.06.32 Seaworthy packing

08.06.47 Seaworthy packing for machine + extension to the table