Description

THICKNESS PLANING MACHINE SCM GROUP mod.NOVA S520 – As per E.C. rules

TECHNICAL DATA
Working width mm. 520
Working table mm. 530×900
Min/max working height mm. 3,5/300
Max removal mm. 8
Min length to be worked mm. 220
Min width to be worked mm. 10
Shaft rotation speed 4500 r.p.m.
Shaft diam. mm. 120
Nr. 4 knives mm. 35x3x520
Feeding speed 5-8-12-18 
Suction hose diam. mm. 150

STANDARD EQUIPMENT
Table 2-speed motorized lifting with micrometric feeding
Numerical reader of the working height with height decimal control 
Vertical sliding working table through 4 steel screws
1st steel inlet draft roll with helical scoring
Interchangeability of draft rolls
Motor power 7kW 50Hz (8kW 60Hz) 7kW 9,5 HP 50Hz (8kW 11HP 60Hz)
Manual star/delta motor starting (E.C. versions and with electric protections)
Piece inlet and outlet straps
Emergency pushbutton on the front side of the machine
Emergency pushbutton on the backside of the machine (E.C. version)
Micro safety switch at the casing (E.C. version)
Padlockable main switch
Magneto-thermic protection
Transformer for auxiliary circuit 110V
Automatic motor brake (E.C. version)

OPTIONAL

57.01.38 Working table with nr. 2 idle rolls – N.W. This solution is recommended for heavy carpentry works where moist or resinous woods are worked 

57.01.39 1st steel inlet sectioned draft roll in alternative to the standard fluted roll 

57.00.73 3rd motorized draft roll in rubber-covered steel

57.02.36 Steel inlet draft roll/s instead of the rubber-covered one/s
                 N.W.: – The optional is recommended exclusively for works where there aren’t special finishing needs (f.e., heavy carpentry, packings,  fusts for living rooms)
                 – It’s recommended the combination with the option “thickness table with nr. 2 idle rolls”.

57.01.40 Enbloc shaft with throwaway knives ‘TERSA’ equipped with 1 set of knives
                 N.W. It’s recommended the uprated power on the main motor if there are great removals

57.03.23 “Xylent” spiral planer shaft with 3 series of cutting edges equipped with:
                 – n° 84 knives 15x15x2,5mm /4 cutting edges with self-locking and self-centering screws 
                 – nr. 1 Dynamo-metric key for correct and safe locking
                 – nr. 2 inserts for the dynamo-metric key 

57.03.27 Xylent maintenance kit – Case equipped with
                 – 1 bottle of detergent/degreasing liquid for cleaning resins 
                 – 1 Dynamo-metric key calibrated at 5,7 Nm
                 – 2 bit Torx T20
                 – 10 inserts 15x15x2,5
                 – 5 screws M6x15 T20
                 – 1 brush with brass bristles to clean the shaft with assembled inserts 
                 – 1 brush with steel bristles to clean the insert seats 

57.03.28 Kit of 10 spare inserts (15x15x2,5) for Xylent shaft

57.01.70 Motor power 9kW 50Hz (11kW 60Hz) with automatic star/delta starting 9kW 12HP 50Hz (11kW 15HP 60Hz)

08.06.36 Seaworthy case