Description

AUTOMATIC 5-SPINDLE MOULDING STRAIGHTENING MACHINE mod. P-ONE 23/4+UNIVERSAL, COMPLETE WITH SELF-BRAKING MOTORS AS PER E.C. RULES



STANDARD EQUIPMENT

– RIBBED STEEL ENBLOC BASE

– RECTIFIED TUBUKAR STEEL INLET TABLE 2300 mm. LONG

– INDEPENDENT MOTOR GROUP ON EACH GROUP

– UPPER TRAVERSE WITH VERTICAL MOTORIZED MOVEMENT, WITH ADJUSTABLE FEEDING ROLLS AND PRESSERS AT THE SAME TIME OF THE UPPER SHAFT FOR QUICKER AND EASIER SETUP

– FEEDING SYSTEM BY CARDAN JOINTS, BACK DOUBLE CHAIN AND SPEED VARIATOR BY INVERTER

– MOTORIZED RUBBER-COATED ROLL AFTER THE UPPER SHAFT AND IDLE ROLL UNDER THE TABLE

– FEEDING THROUGH 4 TOOTHED ROLLS AND 3RD OUTLET UPPER RUBBER-COATED ROLL

– ADJUSTABLE LEFT VERTICAL SHAFT AT THE SAME TIME OF THE PRESSURE GROUP AND OUTLET GUIDE, FOR QUICKER AND EASIER SETUP

– INLET GUIDE EQUIPPED WITH PRE-STRAIGHTENING SYSTEM ON THE RIGHT SIDE THROUGH SHAVING MILLING CUTTER (ON REQUEST) MOUNTED ON PLANER SHAFT

– PRECISION DECIMAL READING 0,1 mm. OF THE MOVEMENTS OF THE 2nd-3rd-4th SHAFT + UNIVERSAL (10 DECIMAL NUMERATORS)

– QUICK TOOL ADJUSTING SYSTEM

– POSSIBILITY TO ASSEMBLE MILLING CUTTERS ON THE 2nd – 3rd – 4th SHAFT + UNIVERSAL UP TO A MAX. DIAM. OF 200 mm. AND A MIN. DIAM. OF 110 mm. (MAX. PROFILING DIAM. 160 mm.)

– AXIAL ADJUSTMENT OF THE 2nd-3rd- 4th SHAFT 35 mm. THROUGH CONTROLS ON THE FRONT

– VERTICAL STROKE OF THE SPINDLE MOULDER AT -40 mm. UNDER THE WORKTABLE WITH MILLING CUTTERS MAX. DIAM. 160 mm.

– PNEUMATIC PRE-PLANER ROLL WITH EXCLUSION FROM CONTROL BOARD

– PNEUMATIC PRESSURE ON FEEDING GROUPS

– DIRECT MOTOR STARTING BY LIGHT PUSHBUTTONS FROM CONTROL BOARD

– SOUNDPROOF PROTECTION CABIN EQUIPPED WITH SAFETY MICRO-SWITCH

– CONTROL BOARD WITH MAGNETO-THERMIC PROTECTION

– PADLOCKABLE MAIN SWITCH

– NR. 2 EMERGENCY PUSH-BUTTONS

– LOW TENSION AUXILIARY CIRCUIT

– SERVICE KEYS

– LIGHT IN THE HOSE opening



TECHNICAL DATA

Max. working width (with tool diam. 125 mm.) 230 mm.

Min. working width (with tool diam. 125 mm.) 25 mm.

Max. working height (with tool diam. 125 mm.) 130 mm.

Min. working height (with tool diam. 125 mm.) 8 mm.

Feeding speed by inverter 4/20 mt/l’

Spindle rotation speed 6000 r.p.m.

Tool-holder spindle diam. 40 mm.

Diam. and length of tools of the 1st Horizontal spindle D. 125 mm. – 230 mm.
(vertical) tool dimensions 125 mm. x 130 mm.

Min/max diam. of cutters of vertical spindles 125 mm.
Min/max diam. of the upper horizontal spindle 125 mm.
Shaving cutter dam. and thickness 145 mm. – 12 mm.
Infeed table 2300 mm. long
Horizontal and vertical movement of the surface planer 10 mm.
Planer spindle motor power (1st group) 5,5 HP (4 kW)
Right spindle moulder motor power 2nd group) 4 HP (3 kW)

Left spindle moulder motor power (3rd group) 4 HP (3 kW)

Upper horizontal motor power (4th group) 5,5 HP (4 kW)
Universal shaft motor power (5th group) kW 4 (HP5,5)
Feeding motor power 1,3/1,7 HP (1/1,3 kW)
Lifting motor power kW 0,37 (HP 0,5)
Suction inlet diam. (nr. 4) 120 mm.

Min/max diam. of profiling tools (160 mm. under the worktable) 110 mm.-200 mm.

Max. diam. of tool throat 160 mm.

Min. length of the single working piece 400 mm.

Toothed and rubber-coated feeding roll diam. 130 mm.