SHREDDER Mod. M-1 - Output 170 kg/h - E.C.
GRINDER mod. M-2 - Output 170 kg/h - As per E.C. rules
The M-1 grinder is suitable for grinding:
- high and low-density plastic
- hides and rubber
It consist of:
A weight-bearing structure consisting of an assembly of different thicknesses of sheet metal to ensure sturdiness and to eliminate noise as far as possible during operation. All the parts of the structure are snap-connected to ensure alignment and maximum precision.
PLC- controlled hydraulic unit for moving the feed box.
Rotor in special steel made of a single body on which the cutting tools are mounted provided with four cutting edges bits in Vidiam. The tools can be changed easily when they are worn out or broken because they are fixed with screws.
Counterblade in hardened shock-resistant steel.
Power cabinet that encloses all the safety devices and guards, provided with a PLC that controls the hydraulic panel during operation of the machine.
If the rotor jams, the PLC will reverse the rotation direction of the rotor to facilitate release. After rotor rotation has been reversed, the rotor resumes the grinding direction. If the jam is repeated several times in succession, the machine stops and generates an alarm.
Direct-drive reduction unit with cast iron body provided with a reaction arm to prevent violent blows if non-grindable material is inserted into the hopper. It is supported by adjustable radial bearings with two crowns of rollers that can withstand even really heavy-duty situations.
It's positioned horizontally in order to allow the lead screw to be constantly in oil bath in such a way as to assure a perfect functioning.
Large loading opening - closed by a door with a safety system against the sudden opening during the functioning.
- Outlet dimensions according to grid dimensions, diameter 12 to 30 mm.
- Rotor diameter mm. 240x400
- Loading port mm. 1100x700
- Output 170 kg/h (it dedpends on the material to be ground)
- Motor HP 12,5
- Hydraulic power kW 0,75
- Installed power kW 9,2
- Blades n. 11
- 3-phase Electric motors in V. 230/400-50 Hz
- Cutting blades: mm.30x30 - concave face
- Noise level 80+90 dB(A), depending on material type.
- Machine supplied with use and maintenance manual.
- Overall dimensions mm. 1615x820x1400
- Weight Kg. 820
ALSO WE RECOMMEND THESE PRODUCTS ...
Regular Price: €5,400.70
Special Price €4,212.55
Regular Price: €3,210.00
Special Price €2,608.13
Regular Price: €11,250.00
Special Price €9,140.63
Regular Price: €3,000.00
Special Price €2,512.50
Regular Price: €339.30
Special Price €271.44
Regular Price: €11,990.00
Special Price €9,741.88
Regular Price: €1,200.00
Special Price €975.00
Regular Price: €681.70
Special Price €545.36
Regular Price: €6,077.00
Special Price €5,089.49