MANUAL HOT WIRE SHEARS FOR INSULATING PANELS (COAT SYSTEM) MOD.TM-LINE

 1.600,00 (Vat Excluded)

SKU: TM-LINE Categories: ,

MANUAL HOT WIRE SHEARS FOR INSULATING PANELS (COAT SYSTEM) MOD.TM-LINE
This model of hot wire shears is a professional equipment for cutting EXPANDED POLYSTYRENE/EXTRUDED AND POLYURETHAN FOAMS.
Machine of high quality and stoutness that make it the top in the market.
The different metrical and angular adjustments allow to make different types of cuts for any need of yard.
Thanks to its telescopic structure, it can cut panels up to 1250mm.
It doesn’t need maintenance.
Handy to be handled and transported thanks to its handle in the shelf and to the reduced dimensions, it can be easily put in the boot of a small car.
Trough the pedestal that can be opened, it’s positioned in vertical on the ground.
The TMline, with its high precision, makes very easy the execution of cuts of standard panels during laying of coat insulating systems. In fact, thanks to a careful cut, you will not more incur in the creation of thermic bridges (as prescribed by the regulations in force about energetic savings), nor even less in troublesome and polluting chips from saws or shears with traditional blades.
Either for straight or angular cuts or even for those ones with batten, the result will appear net and clean like it had been made in the factory. 

CARATTERISTICHE TECNICHE
Cutting length 1250 mm
Cutting depth in mm 280 double upright for angles with meter
Type of cut: Angular on all sides of panel – Straight cut – Step cut
Weight 18 Kg
Overall dimensions 100 x 56 x 27 cm
Absorption 120 Watt in low – Tension 50/60 hz
Feeding 230 Volt

 

CARATTERISTICHE E VANTAGGI
  • Aluminium structure, with personalized profile, to make the shears stout, light and functional;
  • Different scales with millimetric and angular graduation with the possibility of direct reading and setup of width, depth and cutting angle;
  • Easy setup of the cutting height;
  • Sliding slides on ball bearings, no jamming of guides for the execution of easy and precise cuts;
  • The adjustment of the bow allows to shorten the wire and to have more power in damp and cold days.
  • Thanks to a new conception of the cut, this machine is equipped with a well dimensioned wire, fed by a great transformer (120 WATT), in order to obtain a quick and net cut;
  • The advantage to have a supply of wire on board.
  • Easy replacement of the wire with quick loading of the spring;
  • Thanks to the telescopic innovation, the TMLine is easily trasportable in the boot of the car, respecting anyhow the precision of the cut thanks to the innovative system of the bow, anchored to the upper and lower part of the structure.
Weight 50.0000 kg
Manufacturer

Nettuno

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top
Do you need help ? Contact us