Description

CIRCULAR PANEL SAW SQUARING MACHINE SCM GROUP mod.CLASS SI400 – As per E.C. rules

TECHNICAL DATA
Max cutting height at 90° mm. 140 with blade 400
Max cutting height at 45° mm. 97 with blade 400
Blade inclination (grades) 45
Blade lifting and inclination: manual
Main blade rotation speed 3000-4000-5000 r.p.m.
Engraver blade rotation speed 8500 r.p.m.
Main blade motor power kW (HP) 50Hz 7 (9,5)
Engraver blade motor power [S1] kW (HP) 50Hz 0,9 (1,2)
Squaring capacity: with carriage 3200 mm 3200×3200 / with carriage 3800 mm 3800×3200
Cutting width at the parallel guide mm. 1270
Suction mouth diam.:
– at the base mm 120
– at the hanging protection mm 100
– at the dividing knife mm 60

STANDARD EQUIPMENT
Warranty 10 years on the carriage sliding system 
Anodized aluminium extruded sliding carriage with sliding system on steel guides fastened by riveting system
Lifting and inclination of the blade group through handwheels from the machine front and visualization of blade group inclination through mechanical indicator.
Eccentric piece-tightening arm.
Squaring frame for quick positioning of the guide in angular cuts.
Extensions at the outlet table.
Sliding carriage 3200 mm long.
Manual parallel guide with readout of the position on metrical scale with sliding on steel bar diam. 40 mm and micrometric adjustment.
Direct starting of the main motor by pushbuttons.
97.04.49 Motor 7kW 50Hz (8kW 60Hz) – with direct starting: kW7 HP9,5 Hz50 (kW8 HP11 Hz60)
Engraving group with independent motorization from the outside and blade quick re-positioning stops.
Emergency pushbutton on the front of the machine.
Emergency pushbutton on the side of the parallel guide (E.C. version).
Access door to blade replacement with quick locking (E.C. version) and safety micro-switch.
Magnetothermic protection
Protection at the blade assembled on the dividing knife (Versions with electric protections) with suction mouth diam. 60 mm
Protection at the blade assembled on the dividing knife (Versions with electric protections) with suction mouth diam. 60 mm
Automatic motor brake on the main blade (E.C. and USA/Canada versions)
Padlockable main switch
Transformer for auxiliary circuit 110 V

OPTIONAL

11.02.40 Sliding carriage 3800 mm long – squaring capacity with engraver 3800 mm

95.11.06 Start/stop pushbuttons on the top of the sliding carriage for starting the main blade, the engraver blade and their stop

 57.02.27 “Quick Lock” squaring guide on the frame with positioning, simultaneous locking or unloacking. Equipped with extensible roll for support of blade mm 2400.

N.W. (Obligatory to select a guide for angled cuts)

57.00.42 Square guide with nr. 3 LCD readers for stop position. Each stop is equipped with independent electronic reader with measurement system on magnetic band and visualization on LCD display.

57.00.51 Guide for angled cuts on sliding carriage equipped with extendable stop for cutting sizes up to 1500 mm.

57.00.44 Guide for angled cuts with compensation of the stop position as to the blade independently from the used angles, equipped with aluminium guide with stop for dimensions up to 1500 mm.

57.00.30 Guide for angled cuts with electronic readers and compensation of the stop position as to the blade independently from the used angles. Aluminium guide with stop for dimensions up to 1500 mm. Independent electronic digital readers for stop position and rule tilt angle. Measurement system on magnetic band and visualization on LCD display.

57.03.09 Squaring frame with CompeX device for angled cuts with automatic compensation of stop position.
                 – The exclusive system allows the working even when you apply the optional guide for complementary cuts.
N.W.: not compatible with the optional “Quick Lock” device for complementary cuts.

57.03.10 Guide for complementary cuts to be applied at the standard squaring guide supplied with the machine.

57.00.45 Guide for parallel cuts on sliding carriage, quick installation on the carriage, equipped with millimetric rule, stop extension for cutting sizes up to 1000mm and millimetric measurement system for the 1st trimming cut.

57.00.41 Guide for parallel cuts on sliding carriage with electronic reader, quick installation on the carriage. Equipped with electronic digital reader with measurement system on magnetic band and visualization on LCD display. Equipped with stop extension for cutting sizes up to 1000mm and millimetric measurement system for the 1st trimming cut.

28.01.36 Cutting width 1000 mm on parallel guide

28.01.35 Cutting width 1500 mm on parallel guide

31.12.40 Presser on the carriage, equipped with nr. 2 pneumatic pressers with centralized control of the working capacity:
– 3030 mm with sliding carriage 3200
– 3650 mm with sliding carriage 3800

57.00.16 2nd frame with support for rail sliding to support great panels

97.04.68 Motor 9kW 50Hz (11kW 60Hz) equipped with automatic star/delta starting: kW9 HP12 Hz50 (kW11 HP15 Hz60)

19.03.08 Hanging protection (version with electric protection) – totally excludible, with built-in suction and mouth diam. 100 mm

08.62.54 Seaworthy packing