CIRCULAR SAW SQUARING MACHINE SCM GROUP mod. L’INVINCIBILE SI5 – As per E.C. rules
Main blade diam. mm. 550
Engraver blade diam. mm. 120
Diametres to be used simultaneously 450×120
Squaring capacity with carriage and expandable stop: with carriage 3200 mm 3200×3200 / with carriage 3800 mm 3800×3200
Max blade cutting height at 90° mm. 200
Max blade cutting height at 45° mm. 130
Blade inclination (grades) 0/+46
Rotation speed of the main blade r.p.m. 2500-3500-5000
Engraver rotation speed r.p.m. 8500
Main blade motor power kW 7 50Hz
Engraver blade motor power Hz50 kW 0,9
Cutting width at the parallel guide mm. 1500
Suction mouth diam.:
– at the base mm 120
– at the suspended protection mm 100
10 year guarantee on the carriage sliding system
Aluminium carriage with arch-shaped contact sliding system on steel hardened and rectified guides, fastened by riveting system.
“EASY TOUCH 7” electronic control, equipped with:
– CPU ARM, 7″ colour flat screen
– Direct management of the following working axis, by manual method, incremental manual, half-automatic, automatic:
* main blade lifting, blade group inclination, parallel guide, engraver blade lifting, engraver blade translation, nr. of revolutions of the blade with inverter (optional on SI3 and SI5, standard on SIX)
* possibility to memorize up to 999 work programs of the managed axis
* program of sequential heights at the parallel guide for the execution of max. 6 cuts by one program
– Operator’s assistance throught graphics for the solution of unknown quantities in working of individual pieces, of composed handworks with development and locating of dimensional heights and work angles either of the guide on the table or of the blade
– Tool database
Function of assistance to the operator on electronic control, equipped with:
– locating of the correct position of the stop on the square guide or the parallel guide in square workings with inclined blade
– locating of the correct position of the stop on the guide in workings with angled guide on the table with or without inlined blade
Orientable pendant control board.
Engraver group with independent motorization.
Programmed parallel guide with sliding on THK with axis controlled in continuous current, equipped with transmission by ball blow-by screw, max speed 25 m/min.
– excludable guide under the worktable, cutting width at the parallel guide 1500 mm.
Electronic adjustment of the engraver group for motorized movements of translation and vertical deplacement of the engraver blade
– automatic insertion in working position by blade starting
– automatic exclusion by switching off
Support of the squaring frame with sliding on linear prismatic guides with ball blow-by slides.
Squaring frame with CompeX device for angled cuts with automatic compensation of stop position.
– The exclusive system allows working even when the optional guide for complementary cuts is applied
Integrated starting/stop pushbuttons in the carriage.
Eccentric piece-tightening arm
Version with sliding carriage 3200 mm.
Emergency pushbutton on the front of the machine and on the side of the parallel guide
Direct starting of the main motor by pushbuttons
Suspended protection at the blades with built-in suction, mouth diam. 100 mm.
Transformer for auxiliary circuit 110 V.
Automatic brake of the main motor.
Access door at blade replacement with quick lockings and safety microswitches.
Conformity certificate as per E.C. rules.
57.03.17 “EASY TOUCH 12” electronic control, 12” colour flat screen
57.03.18 Cutting width at the parallel guide 1000mm.
53.01.00 Sliding carriage 3800 mm – Squaring capacity with engraver 3800 mm.
57.02.86 Cast iron extensions at worktable
57.00.42 Square guide with nr. 3 LCD readers for stop position. Each stop is equipped with independent electronic digital reader with measurement system on magnetic band and visualization on LCD display
53.01.23 Guide for angled cuts on sliding carriage equipped with extendable stop for cutting sizes up to 1500 mm.
57.00.44 Guide for angled cuts with compensation of stop position as to blade independently from used angles, equipped with aluminium guide with stop for dimensions up to 1500mm.
53.01.01 Guide for angled cuts with electronic visualizers and compensation of stop position as to blade independently from used angles, equipped with aluminium guide with stop for dimensions up to 1500mm. Independent digital readers for stop position and tilt angle. Measurement system on magnetic band and visualization on LCD display
53.01.30 “Full Support & Wireless” Orientabie frame for angled cuts equipped with Wireless function, manual deplacement, with possibility of angles from +50° to -50° as to the perpendicularity of the cutting axis with its micrometric adjustment. Measurement system of angles on magnetic band and visualization on LCD display, real time updating of square stop position when blade inclination and/or cut angle changes.
N.W. Code 57.00.42 Square guide with n° 3 LCD readers for stop position, already included
57.03.10 Guide of complementary cuts to be applied to the standard squaring guide supplied with the machine
53.01.03 Support carriage for “Full Support” for an easy replacement, equipped with wheels and mechanical lifting by handwheel
57.00.45 Guide for parallel cuts on sliding carriage, quick installing on the carriage, equipped with millimetric rule, stop extension for cutting sizes up to 1000mm and millimetric reference system for the 1st trimming cut.
53.01.12 Guide for parallel cuts on sliding carriage with LCD visualizers, quick installing on the carriage. Equipped with electronic digital reader with measurement system of angles on magnetic band and visualization on LCD display. Equipped with stop extension for cutting sizes up to 1000mm and millimetric reference system for the 1st cut.
53.01.17 Presser on the whole length of the carriage, equipped with nr. 2 pneumatic pressers with centralized control, working capacity: – 3030 mm with sliding carriage 3200 – 3650 mm with sliding carriage 3800
53.01.18 2nd frame with support for track sliding to support great panels
57.02.72 Inverter for electronic speed variation 2350-5200 r.p.m., electronic automatic starting of the main motor:
– visualization of the active speed NC
– blade speed adjustment from NC with reference to blade database
– electronic braking system – Motor kW9 Hz50 kW9 HP12 Hz50 (kW11 HP15 Hz60)
N.W.: Obligatory to select the Autotransformer with tensions 220, 230, 600 Volt
11.11.98 Autotransformer for tensions 220V, 230V, 600V N.W.: obligatory when the inverter is foreseen for tensions of 220V, 230V e 600V.
97.05.45 Motor 9kW 50Hz (11kW 60Hz) equipped with automatic star/delta starting: kW9 HP12 Hz50 (kW11 HP15 Hz60)
97.04.69 Motor 14kW 50Hz-60Hz equipped with automatic star/delta starting: kW14 HP19 Hz50-Hz60 N.B: (not available for Volt 220 )
53.01.34 “Pro-Lock” system for the quick locking of the main blade
53.01.33 “DADO” working – Mechanical preset to use a tool instead of the main blade.
– max diam. 230mm – internal diam. 30mm – max thickness 20mm – max working depth 40mm.
57.02.87 SAV€NERGY System of intelligent management of energetic consumptions of the machine for elimination waste.
N.W. It’s obligatory to select the optional “inverter”
08.03.89 Seaworthy packing