Description

CIRCULAR SAW SQUARING MACHINE WITH TILTING BLADE SCM GROUP mod. CLASS SI X – As per E.C. rules

TECHNICAL DATA
Max cutting height at 90° (mm) 200 with blade 550mm
Max cutting height at +45° (mm) 130 with blade 550mm
Max cutting height at -45° (mm) 105 with blade 550mm
Blade inclination (degrees) -46 ÷ +46
Blade lifting and inclination: programmed
Height control / visualization: Easy
Main blade rotation speed (r.p.m.) 3000 ÷ 5000 (Inverter)
Main blade motor power kW (HP) 9 (12) Hz50
Squaring capacity:
– with carriage 3200 (mm) 3200×3200 
– with carriage 3800 (mm) 3800×3200
Cutting width at the parallel guide (mm) 1270
Suction mouth diam.: (mm)
– at the base 120
– at the suspended protection 100

STANDARD EQUIPMENT
Anodized aluminium sliding carriage with archiform contact sliding system on steel hardened and rectified guides, fastened through riveting system
Sliding carriage 3200 mm long
Guarantee 10 years on the carriage sliding system
Squaring frame for quick positioning of the guide in angular cuts, equipped with:
– telescopic guide with 2 reversible stops and metrical rule that’s inclined towards the operator
– telescopic support 
– idle roll to facilitate panel loading and unloading
Manual parallel guide with position readout on metrical scale, sliding on steel bar 50 mm and micrometric adjustment
Extensions at outlet table
Eccentric piece-tightening arm 
Electronic control “EASY” – equipped with:
– LCD monitor 7” format 16:9
– programming of blade height and inclination 
– programmaing of parallel guide positions  
– operator assistance functions to make complex cuts 
– blade database management  
– 300 storable programs
Motor 9kW (12HP) 50Hz – 11kW (15HP) 60Hz
Inverter for electronic speed variation 3000 ÷ 5000 r.p.m. with automatic electronic starting of the main motor:
– speed visualization on CN
– blade speed adjustment from CN with reference to the blade database 
– electronic braking system 
Emergency pushbutton on the front of the machine 
Emergency pushbutton on the side of the parallel guide (E.C. version)
Access door to blade replacement with quick locks (E.C. version) and safety microswitch
Magnetothermic protection
Suspended protection at blades with incorporated suction, mouth diam. 100 mm
“AP System” for the automatic positioning of the suspended protection according to blade inclination, SCM patent
Automatic motor brake on the main blade (E.C. and USA/Canada versions)
Padlockable main switch 
Transformer for auxiliary circuit 110 V
Conformity certificate as per E.C. rules (E.C. Version)

OPTIONAL

57.03.47 Version “EASY 3 UP PLUS” CE and USA/Canada, equipped with:
– Adjustable hanging control panel easily accessible by the operator
– Motorized parallel guide managed by CN
* position readout through encoder
* a sliding on linear recirculating ball guide and movement with ball screw
* continuous adjustment through automatic pushbutton or positionings
* possibility of incremental movements 
* automatic calibration 
* guide body completely excludable under the worktop 
* cutting width 1500 mm
– Integrated start/stop pushbuttons in the sliding carriage for the starting of the main blade, scoring blade and their stop

57.03.48 Engraving unit with independent motorization – Rotation speed of the engraving unit 6000 r.p.m. – Engraving blade motor power (50 Hz) 1,3 (1,7) kW (HP)
Equipped with:
– automatic 2-axis adjustment for the motorized movements of translation and vertical movement of the engraving blade 
– automatic exclusion by turning off the blades 
– expandable engraving blade
* min. ÷max. thickness: 2,8 ÷ 3,6 mm
* blade diam.: 160 mm
* hole diam.: 20 mm
* Number of teeth: Z 36

11.02.40 Length of the sliding carriage 3800 mm – squaring capacity with engraver 3800 mm

57.03.45 Length of the sliding carriage 2200 mm – squaring capacity with engraver 2200 mm

57.03.41 Reinforcement surface treatment for sliding carriage and mobile crosspieces of the squaring frame – Dedicated for intensive and abrasive material works
N.W. Not available for “Lenght of the sliding carriage 2200 mm”

57.03.49 Adjustable hanging control panel easily accessible by the operator – NOT AVAILABLE FOR THE PRECONFIGURATED VERSIONS

95.11.06 

Integrated start/stop pushbuttons in the sliding carriage for the starting of the main blade, scoring blade and their stop
NOT AVAILABLE FOR THE PRECONFIGURATED VERSIONS

57.02.27 Squaring guide “Quick Lock” on the frame with simultaneous positioning, locking or unlocking. Complete with extensible roll for blde support mm 2400.
N.W. Obligatory to select a guide for angled cuts

57.00.42 Square guide with nr. 3 LCD readers for stop position. Each stop is equipped with independent electronic digital reader with magnetic strip detection system and  visualization on LCD display 

57.00.51 Guide for angled cuts on sliding carriage equipped with extensible stop for cutting sizes up to 1500 mm.

57.00.44 Guide for angled cuts with stop position compensation as to the blade independently from the used angles, equipped with aluminium guide with stop for dimensions up to 1500 mm.

57.00.30 Guide for angled cuts with electronic readers and stop position compensation as to the blade independently from the used angles.
Aluminium guide with stop for dimension up to 1500 mm. Independent electronic digital readers for stop position and rule inclination angle.
Magnetic strip detection system and visualization on LCD display.

57.03.09 Squaring frame with CompeX device for angled cuts with automatic stop position compensation.
– The exclusive system allows working even when the optional guide for complementary cuts is applied.
N.W.: not compatible with the “Quick Lock” device

57.03.10 Complementary cut guide to be applied to the standard squaring guide supplied with the machine 

57.00.45 Quick installation guide for parallel cuts on sliding carriage, equipped with millimeter rule, stop extension for cutting sizes up to 1000 mm and millimeter reference system for the 1st trimming cut.

57.00.41 Guide for parallel cuts on sliding carriage with quick installation electronic reader on the carriage. Equipped with electronic digital reader with magnetic strip detection system and visualization on LCD display
Equipped with stop extension for cutting sizes up to 1000 mm and millimeter reference system for the 1st trimming cut.

11.11.98 Autotransformer for tensions 220V, 230V, 600V – N.W.: obligatory when the inverter for tensioni di 220V, 230V and 600V is foreseen.

57.02.31 Electronic position reader for parallel guide with manual movement and:
– selector for high and low guide and preset pushbuttons 
– electronic visualization of the guide body position sliding on bar diam. 50 mm
– position readout on magnetic band 
– possibility of relative movements
NOT AVAILABLE FOR THE PRECONFIGURATED VERSIONS

28.01.36 Cutting width 1000 mm on parallel guide 
N.W. Not available for “READY 3 UP PLUS” CE and USA/Canada” versions and “EASY 3 UP PLUS” CE and USA/Canada versions

28.01.35 Cutting width 1500 mm on parallel guide 

57.03.52 Motorized parallel guide managed from CN
* position readout through encoder
* sliding on linear ball recirculation guide and movement by ball screw 
* continuous adjustment through automatic pushbutton or positionings 
* possibility of incremental movements 
* automatic calibration 
* guide body completely excludable under the worktop 
* cutting width 1500 mm
NOT AVAILABLE FOR THE PRECONFIGURATED VERSIONS

31.12.40 Full-length presser on the carriage equipped with nr. 2 pneumatic pressers with centralized control, working capacity:
– 3030 mm with sliding carriage 3200 – 3650 mm with sliding carriage 3800

57.00.16 2nd frame with support for rail sliding to support great panels 

57.03.53 Panel support extension with rollway on the side of the parallel guide. Easily excludable when it isn’t used

57.03.35 Quick locking system of the main blade “Pro-Lock” with quick adjustment and without wood splitter keys

57.03.54 Blade-holder drawer integrated in the machine base and tool-holder rack

57.03.42 Additional piece-tightening arm

53.03.30 Machine configuration for the processing of non-wood materials 
A configuration that makes the machine suitable even for the processing of cork, rigid rubber or plastic, plywood covered with plastic material. Metals and wood-cement based composites are excluded.
NOTE WELL, for materials that aren’t included in the list:
Given the high variety of the non-wood market, before committing to offering a technical solution it’s mandatory to send SCM sample material in order to carry out an adequate evaluation.
WARNINGS: The use of suction systems equipped with chip traps is recommended to prevent them from damaging the suction body. According to the type of material you want to work, it’s mandatory to equip the machine with an adequate tool, addressing to your own trusted reseller.
Reommended optional item: – Inverter for speed electronic variation 2700-6000 r.p.m. (CLASS SI 400EP and L’INVINCIBILE SI 3)

53.03.16 Blade micro-lubrication device for the processing of plastic materials and aluminium and brass light alloys
With adjustment system of the amount of sprayed lubricating liquid
N.W.: – The device is obligatory for the processing of light metals, very useful with special plastic materials
– It’s mandatory to select the optional item “Machine configuration for the processing of non-wood materials” for the models that foresee it

08.66.52 Seaworthy packing

08.65.92 Seaworthy packing with motorized parallel guide

08.65.78 Seaworthy packing with hanging control board and motorized parallel guide

Motor powers are to be intended expressed in S6, except where otherwise specified