Description

HORIZONTAL PANEL SAW (PANEL SAW CENTER) CASADEI BUSELLATO mod. AXO 300/32 – As per E.C. rules
Longitudinal cutting capacity 3200 mm 
Pusher stroke 2100 mm 5 pliers 
Simple one-sided runner – stroke 1200 mm

STANDARD EQUIPMENT

Base
• Steel base with tubular structure 
• Rear sliding table made of extruded aluminium equipped with wheels in scratch-resistant material and a table (400 mm wide) covered in bakelite placed on the side of the square guide
• Reinforced ribbed steel worktop with double tubular structure, covered in bakelite 
• Perimeter protection carters fixed to the machine 

Blade carriage
• Steel blade carriage including: 
– Independent motors for main blade and for scoring blade 
– Automatic star-delta starting of the main blade  
– Vertical blade ascent on prismatic guides and recirculating ball runners
– Sliding on 2 cylindrical guides in hardened and ground steel protected by special dust scrapers 
– Advancement by pinion and rack 
– Pneumatic blade change release 
– Balanced distribution of the masses to allow a good cutting finish
– Prismatic sliding wheels in hardened and ground steel 
– Axial and vertical micrometric adjustment of the engraver with external adjustment to the base 
– Blade carriage stroke against the square guide 
• Square guide on the left side  
• Pressure bar with slits. The panels are always stapled up to the tail edge. Pneumatic bar lifting and lowering with precision rack and pinion, pressure adjustable from 1,5 to 6 bar 
• Presser sliding on prismatic guides and recirculating ball runners 
• Double powder conveyor system, an upper one applied directly to the pressing bar to keep the worktable clean and a lower one applied to the blade carriage 
• Hanging control panel located on the left side

Control
Programming and control system PC/PLC “PCCONTROL 1000” including:
– PC office with the following configuration: 
– Colour LCD 17″ video
– Querty keyboard 
– Possibility to insert any network card 
– Windows operative system 
– Interface software WinNCC 12 
Working modes
• Manual mode for the movement of the axis
• Automatic mode for the execution of programs and/or lists of programs 
• Semiautomatic mode for the execution of cuts with 4 different  sizes that can be set
• Possibility to stop the program in automatic running mode to perform some cuts in semiautomatic mode and then resume the interrupted program
• Multitasking operation: it’s possible to program the machine even during the execution of the cutting cycle  
Programming mode 
• Graphic display of cutting patterns
• 5 diferent cutting levels: precut, X, Y, U,V 
• Max number of lines per program: 100 
• Max number of lines per list of programs: 100 
• Max number of  storable programs and lists: (about 80% of the free hard disc space) 
• Label data editor associated with each program 
Production reports 
• Indication on daily production stored on hard disc including: 
– Start time and end time of processing, 
– Number, surface size and cubature of the processed material 
Synoptic mode 
• Operator messaging relating to the pieces to be handled (during processing) 
• Graphic display of the cutting scheme during processing with indication of the cuts made
• Graphic display of the line and the list in execution during processing 
File format 
• File in the format of the optimizer Perfect Optimiser 
Alarms and diagnostics 
• Self-diagnosis and reporting of any errors or possible anomalies through alarm messages 
• Input and output debugger
• Suggestion of the type of intervention required (with the possibility of inserting further descriptions for each type of alarm) 
Unit of measure 
• Unit of measure: millimeters-tenths or inches-thousandths
Languages available 
• Operator interface in the following languages: Italian, English, French, German, Spanish
N.W. The description of the functionalities of the system also includes functions present only with an adequate electrical or mechanical setup of the machine.
Consequently, the label data editor on each program is presente only with the relative optional device in the price list.
Optimizer Cut I
Optimization software integrated to the PCCONTROL control. It allows the creation of optimized cutting schemes and the programming of the machine.
Features: 
• Operator interface in 5 languages: Italian, English, French, German, Spanish
• nr. 30 lines of program
• max nr. 300 pieces per line 
• nr. 3 cutting levels (x y u) 
TELESERVICE remote assistance service via internet 
The remote diagnosis system allows to connect the PC to the service center via internet. 
Software: connection program for: 
– Machine logic and operator interface upgrade 
– data back-up and file transfer 
– configuration, parameter and program control 
– interface display and signal diagnosis 
N.W. Network cable and PC not included. The internet connection must be set up by the customer.

Aligner
• Single automatic aligner, with pneumatic piston full length stroke 1200 mm 
– Min. alignable piece: 60 mm 
– Max alignable piece: 1200 mm 
– Aligner sliding on prismatic guide and recirculating ball runner blocks

Pusher
• Full length motorized pusher with central motor and movement through 2 strong torsion bars. Pusher positioning electronically regulated by magnetic strip (contactless system). “H” profiled steel pusher sliding bars. The transmission is made by 2 precision pinions to guarantee the constant parallelism of the pusher with the cutting line. The pusher is driven by a brushless motor to offer a constant torque at all speeds, continuous speed adjustment up to 0 and high performance without the need for maintenance 
• 5 pliers for gripping panels 
• Adjustable clamping pressure 
• Pair of blades

Electrical system
• Hanging control panel located on the left side 
• High security electrical system complete with: 
– Dust-tight cabinet (IP 55 protection) 
– Padlockable main switch 
– Auxiliary electric circuit 110 Volt for the electronic control, the controls and for low voltage signals 
– Magnetothermic for motors 
– Safety microswitch at the blade access door 
• Front safety protection with rotating strips
• Emergency bar on the whole cutting line 

TECHNICAL FEATURES 
Worktable height 950 mm 
Longitudinal cutting capacity 3200 mm
Pusher stroke 2100 mm
Blade protrusion 90 mm 
Main blade max diam. 380 mm 
Scoring blade diam. 200 mm 
Main blade shaft diam. 80 mm 
Engraver shaft diam. 55 mm 
Main blade rotation speed 50 Hz 3900 r.p.m. 
Scoring blade rotation speed 50 Hz 6300 r.p.m. 
Blade carriage speed 6 ÷ 60 m/min 
Pusher max speed 60 m/min 
Main blade motor power 50 Hz (S6) 9,0 kW (12 HP) 
Scoring blade motor power 50 Hz (S6) 1,3 kW (1,7 HP) 
Standard pliers 5
Total number of pliers for version 32/38/45: 10 /11 /12

INSTALLATION (indicative values) 
Installed power 12 ÷ 21 kW 
Voltage of the basic machine Euro tension (400 V / 50 Hz) 
Compressed air consumption 300 NL/min 
Machine supply pressure required 7 bar 
Air drawn in 4060 m3/h 
Suction speed 20 m/sec 
Nr. 3 suction mouths diam. 120 mm – N° 1 150 mm

N.W. For safety reasons, the advance speed of the pusher is limited to 25 m/min. The data and measurements indicated refer to the basic machine equipment and may  vary according to the options required.

NOTE: FRONT SUPPORTING PLANS ON REQUEST. 
IT’S MANDATORY TO EQUIP THE MACHINE WITH AT LEAST A COMPLETE FIXED WORKTABLE WITH A TEAM GUIDE AND A MOVING TABLE

VARIANTS ON REQUEST:

ELECTRIC VARIANTS AND SAFETY:

CA2201 Preparation to E.C. standards

CA7250 Canada Version

CA2213 Extra for different voltage or frequency

CA4500 Eco System Package
N.W. Obligatory Top speed (except AXO 400 T)

CA2236 Neutral potential generator

CA8245 Forced ventilation for electric cabinet

CA8246 Air conditioning system for electric cabinet

PUSHING STROKE VARIANTS:

CA2288 Pusher stroke 3200 mm (Version 32)

CA3231 Pusher stroke 3800 mm (Version 38)

CA2289 Pusher stroke 4300 mm (Version 45)

VARIANTS FOR WORKTABLES :

CA3613 Worktable with air curtain (Version 32)

CA3614 Worktable with air curtain (Version 38)

CA3615 Worktable with air curtain (Version 45)

VARIANTS FOR TABLES AND GUIDES:

CA3216 Fixed front surface with air curtain 1500×600 mm complete with square guide
N.W. Obligatory to add cooling fan code CA7251

CA3608 Fixed front surface with high efficiency air curtain 1500×600 mm complete with square guide
N.W. Obligatory to add cooling fan code CA3612

CA3218 Fixed front surface with air curtain 2500×600 mm complete with square guide
N.W. Obligatory to add cooling fan code CA7251

CA3609 Fixed front surface with high efficiency air curtain 2500×600 mm complete with square guide
N.W. Obligatory to add cooling fan code CA3612

CA8226 Mobile front surface with air curtain 1500×600 mm
N.W. Obligatory to add cooling fan code CA7251

CA3610 Mobile front surface with high efficiency air curtain 1500×600 mm
N.W. Obligatory to add cooling fan code CA3612

CA8227 Mobile front surface with air curtain 2500×600 mm
N.W. Obligatory to add cooling fan code CA7251

CA3611 Mobile front surface with high efficiency air curtain 2500×600 mm
N.W. Obligatory to add cooling fan code CA3612

CA7251 Centralized fan for air curtain tables
N.W. Select once for all tables.

CA3612 Oversized centralized fan for air curtain tables
N.W. Select for high efficiency tables

VARIANTS FOR PROCESSING:

CA3205 Automatic double aligner 1200 mm

CA2521 Pneumatic optimized double aligner 2200 mm
N.W. Obligatory to add Expansion for micro PLC or Top speed

CA2226 Cycle start/stop pedal

CA8256 Kit for cutting plastic materials
N.W. – For the processing of thin and particularly hard materials it’s recommended to select the blade lock for cutting hard materials CA8236
– Not compatible with automatic double aligner 
– Material sample must be sent to UT bwefore order confirmation

ADDITIONAL OPTIONALS TO THE KIT FOR CUTTING MATERIALS
(To be considered according to the type of material to be cut)

CA8228 Additional pliers, double nail – each one – N.W. Recommended optional

CA8229 Blade air cooling – N.W. Recommended optional

CA8230 Blade cooling and lubrication with switch – N.W. Recommended optional. Not available with code CA8229

CA8231 2-speed main blade shaft 
N.W. It can’t be supplied in conjunction with the automatic star/delta starting – Recommended optional 
Not compatible with CA3259, CA3258 e CA 8232

CA8232 Inverter of blade speed variation
N.W. Motor already included – Recommended optional 
Not compatible with the code CA8231, 2-speed main blade shaft 

VARIANTS FOR BLADE CARRIAGE:

CA3570 Linear prismatic guides for version 3200 mm
N.W. Obligatory carriage with independent ascent. Obligatory Top Speed (except AXO 400 T)

CA3571 Linear prismatic guides for version 3800 mm
N.W. Obligatory carriage with independent ascent. Obligatory Top Speed (except  AXO 400 T)

CA3572 Linear prismatic guides for version 4500 mm
N.W. Obligatory carriage with independent ascent. Obligatory Top Speed (except  AXO 400 T)

CA3258 Main motor power 14 kW (19 HP) 50 Hz (S6)
N.W. Obligatory the automatic star/delta starting code CA3257 – Not compatible with 2-speed blade motor code CA8231

CA32V4 Main motor power 15 kW (20 HP) (S6)
N.W. Obligatory the automatic star/delta starting code CA3257 – Not compatible with 2-speed blade motor code CA8231

CA8257 Pneumatic blade flanges locking by selector
N.W. Obligatory pneumatic flange locking of blade and scoring blade. Obligatory the carriage with blade and scoring blade group with independent ascent

CA2255 Carriage with blade and scoring blade group with independent

CA2223 Postforming system
N.W. Obligatory the carriage with blade and scoring blade group with independent ascent code CA2255

CA2237 Engraver adjustable electronically by control 
N.W. obligatory the carriage with blade group and engraver with independent ascent code CA2255

CA8283 Optimized blade and presser ascent + stem lock
N.W. obligatory the carriage with independent blade ascent and engraver

CA5018 Check for panel measurement

CA2214 Pneumatic exclusion engraver
N.W. Already included with independent ascent of the blade group and engraver code CA 2255

CA2253 Slot execution device

CA2523 Electronic slot execution device
N.W. Obligatory to add Expansion of micro PLC or Top Speed (except AXO 400 T)

CA3531 Execution device for roundtrip slots
N.W. Obligatory to select a slot execution device (manual or electronic) – Obligatory to select “Carriage with blade unit and independent ascent engraver” CA2255

CA3219 Device for making cutouts
N.W. Obligatory the option Top Speed – Obligatory to select “Carriage with blade unit and independent ascent engraver” code CA2255

CA7249 Blade + engraver set

CA3260 Blade + postforming engraver set

VARIANTS FOR THE PUSHER GROUP:

CA3212 Top Speed
N.W. For the countries with E.C. standards, the feeding speed is limited to 25 m/min

CA3648 Top Speed Plus
N.W. For the countries with E.C. standards, the feeding speed is limited to 25 m/min 
N.W. Obligatory to select the option “Linear prismatic guides on pusher sliding”

CA2277 Additional pliers – each one
N.W. The max. total number of pliers can be: • 10 for the version 32 • 11 for the version 38 • 12 for the version 45

CA2522 Differentiated pressure on presser and pliers 
N.W. Obligatory to add the Expansion of micro PLC or Top Speed (except AXO 400 T)

CA3204 Pneumatic device for handling panels with protruding edge 
N.W. The device is applied to all pliers 

CA3573 Adaptive speed carriage control
N.W. Obligatory to select the Top Speed

CA3574 Linear prismatic guides on pusher for the version 3200 mm
N.W. Manual lubrication (automatic if the option “Prismatic guides of the blade carriage” is selected)

CA3575 Linear prismatic guides on pusher for the version 3800 mm
N.W. Manual lubrication (automatic if the option “Prismatic guides of the blade carriage” is selected)

CA3576 Linear prismatic guides on pusher for the version 4500 mm
N.W. Manual lubrication (automatic if the option “Prismatic guides of the blade carriage” is selected)

VARIANTS FOR MACHINE CONTROL:

HARDWARE DEVICES:

CA2247 Micro PLC expansion

CA2217 UPS (uninterruptible power supply) for PC/PLC

CA2292 Compact labeling machine – Barcode label printing
N.W. Obligatory the label printing software included in WINNCC software package

CA2211 Labeling machine – Barcode label printing
N.W. Obligatory the label printing software included in WINNCC software package

CA3581 17″ Touch Screen Monitor

APPLICATION SOFTWARE:

CA2580 WINNCC software package

CA3210 Cut Office – office optimization software

CA2581 Perfect Optimiser Plus + Quick cut – optimization and connection software 
N.W. The scrap percentage and the update of the order are displayed in real time (display of the requested and obtained pieces)
N.W. Specify if a parallel or USB key is required

PACKAGES: 
N.B. For container loading it’s obligatory to select a package

CA9202 Pallet packing with plastic “version 32″

CA9204 Pallet packing with plastic “version 38″

CA9203 Pallet packing with plastic “version 45″

CA9206 Pallet packing with plastic “version 32″

CA9210 Pallet packing with plastic “version 38″

CA9207 Pallet packing with plastic “version 45″

ALSO THE FOLLOWING MODELS ARE AVAILABLE:

AXO 300/38
Longitudinal cutting capacity 3800 mm 
Pusher stroke 3200 mm 5 pliers 
1200 mm single stroke lateral aligner

AXO 300/45
Longitudinal cutting capacity 3800 mm 
Pusher stroke 3200 mm 5 pliers 
1200 mm single stroke lateral aligner